Specifications

Transmitter

setup

5.1.7 Reverse Switch

Press UP or DN to select Function Menu in Mian Menu, press

UP or DN to choose Reverse Switch and press ENT to enter

into Reverse Switch interface;press UP or DN to choose

channel, press R or L to shift the status between normal and

reverse.and press ENT to confrim and then press EXT to exit.

Channel

Elevator

Aileron

Throttle

Rudder Gear Pitch

Gyro

Status

Normal

5.1.8 Throttle Curve

Press UP or DN to select Throttle Curve in Function Menu, press ENT, the enquiry dropdown is shown "All

servos hold?" press R or L to choose Cancel, and press ENT to confirm. There are total two flight modes:

Normal Flight, Stunt, and the flight mode can be shifted by FMOD. Press DN , you can shoose On or Off, press

R/L to choose On.

Press DN, there will interface of Curve Point, choose L M H by press R/L. press DN, there will be Output

Setting. press R/L to choose the value of point, and press ENT to confirm and then press EXT to exit.

point

Flight mode

output

Normal Flight 0.0% 50.0%

100.0%

Stunt

100.0% 75.0%

100.0%

5.1.9 Pitch Curve

Press UP or DN to select Pitch Curve in Function Menu, press ENT, the enquiry dropdown is shown "All servos hold?"

press R or L to choose Cancel, and press ENT to confirm. There are total two flight modes: Normal Flight, Stunt, and

the flight mode can be shifted by FMOD. Press DN , you can shoose On or Off, press R/L to choose On.