Specifications

5.1 DEVO-7E(standard radio) setting
5.1.1 Boost Screen
Elevator trim Throttle trim
Transmission power display
Battery charge
indicator
Model name
Timer display
Model type
Throttle percentage
display
value
Rudder trim display Aileron trim
display
5.1.2 Type Select
Press ENT to get Main Menu and press UP or DN to select Model Menu. Press ENT to enter and press UP or
DN to select Type Select and press ENT to enter setting interface.Press R or L to get the icon of Helicopter
and press ENT to confirm, then press EXT to exit.
5.1.3 Model Select
Press UP or DN to select Model select in Model Menu, press ENT to get the Model Select setting interface;
press UP or DN to select MOD 1, then press ENT to confirm and then press EXT to exit.
5.1.2 Type Select 5.1.3 Model Select
5.1.4 Model Name
Press UP or DN to select Model Name in Model Menu, press ENT to get the Model Name setting interface.
Press UP or DN to select the character and figure which are needed to be changed, press R or L to change
character and named "MASTERCP". press EXT to exit after finished.
5.1.5 Swash Type
Press UP or DN to choose SWASH in Model Menu, press ENT enter to Swash setting interface. press UP or
DN to choose 1 Servo Normal, and press ENT to confirm and then press EXT to exit.
5.1.4 Model Name 5.1.5 Swash Type 5.1.6 Device Output
Press UP or DN to select Output Device in Model Menu and press ENT to enter Output Device interface;press UP or
DN to select "HOLD SW" "Activate", and "FMOD SW" "Gyro". Press ENT to confirm and then press EXT to exit.
4
05
Transmitter
setup