Specifications

07
Instructio
n
and
attention
of ESC
7.1 Function of brush ESC
Electronic Speed Controller (ESC), mainly used in EP helicopter as a drive output device, is an electronic
control circuit for the revolution speed and CW- and CCW-rotation of the motor. It will magnify the proportional
signal it receives into voltage and current that can be directly exploited by the motor, the advantages of which,
compared with the traditional mechanical speed controller, include compact dimension, long longevity, high
efficiency and high output power.
7.2 Connection method of brush ESC
*
*
*
*
*
*
S/N Full name Function
1
Tail motor connecting wire connect with Tail motor.
2
Main motor connecting wire Connect with Main motor.
3
Power connecting wire Connect with Lipo battery.
4
Tail motor signal wire Connect with TAIL MOT channel of receiver.
5
Main motor signal wire Connect with THRO channel of receiver.
6
Low voltage protection signal wire Connect with POWER CHECK channel of receiver.
7.3 Matters needing attention
All the signal plugs of brushless ESC wires should be correctly connected, Otherwise the brushless ESC may
fail to operate correctly.
11