Specifications

6.1 RX2637H-D receiver features
(1) Adopts 2.4G DSSS technology with the functions of automatic scanning, code binding and LED receiving
indication.
(2) The use of a high performance receiver dramatically reduces the possibility of signal loss and ensures
the accuracy and reliability of signal reception.
(3) makes fine actions and powerful functions available.
(4) Controlled by 6-axis gyro,with flybarless balance electronic system, amend flight status automatically,
makes more stable flight and flexible 3D performance.
6.2 Functions of receiver
S/N Name for short Full name Function
1
ELEV
Elevator servo
Connects to the elevator servo and receives the control
signal of elevator servo.
2
AILE
Aileron servo Connects to the aileron servo and receives the control
signal of aileron servo.
3
PIT
Pitch servo Connects to the PIT servo and receives the control signal
of PIT servo.
4
Not used
Not used Not used
5
THRO
Throttle
Connects to the main motor signal wire of ESC, and
receive the control signal of main motor.
6
Not used
Not used Not used
7
POWER CHECK
Power check Connects to Power check signal wire of ESC.
8
SPARE
Spare chanel(After receiver upgrade to the programe with
Spare chanel telemetry function, it can connect to the temperature
sensor to monitor the motor temperature.
9
TAIL MOT
Tail motor
Connects to tail motor signal wire of ESC, receive control
signal of tail motor.
10
ELEV G.S
Elevator gyro Adjusts the Elevator gyro sensitivity gain, changes the
sensitivity adjust dial flight effect.
11
AILE G.S
Aileron gyro Adjusts the Aileron gyro sensitivity gain, changes the flight
sensitivity adjust dial effect.
12
ELEV/AILE EXT.
Elevator/Aileron servo
Adjusts Elevator/Aileron servo Travel. extent dial
8
06
Setup of the
RX2637H-D
receiver