User Guide

English-13-
Whenfinished, highlightNextand pressOK button
tocontinue.
Note: Searching duration will change depending on the
selected Search Step.
Satellite:IfSatellitebroadcastsearchoptionisturned
on,theTVwillsearchfordigitalsatellitebroadcasts
after otherinitial settings arecompleted. Before
satellitesearchisperformedsomesettingsshouldbe
made.Antenna Typemenuwillbedisplayedfirst.You
canselectAntenna TypeasDirect,Single Satellite
CableorDiSEqC switchby using Leftor Right
buttons.AfterselectingyourantennatypepressOKto
seetheoptionstoproceed.Continue,Transponder
listandConfigure LNBoptionswillbeavailable.You
canchangethetransponderandLNBsettingsusing
therelatedmenuoptions.
Direct: If you havea singlereceiver and adirect
satellitedish,selectthisantennatype.PressOKto
continue.Selectan availablesatellite on thenext
screenandpressOKtoscanforservices.
Single Satellite Cable: If youhave multiple
receiversandasinglesatellitecablesystem,select
thisantennatype.PressOKtocontinue.Configure
settingsbyfollowinginstructionsonthenextscreen.
PressOKtoscanforservices.
DiSEqC switch:Ifyouhavemultiplesatellitedishes
andaDiSEqC switch,selectthisantennatype.Then
settheDiSEqCversionandpressOKtocontinue.
You can setup to foursatellites (if available) for
versionv1.0andsixteensatellitesforversionv1.1
onthenextscreen.PressOKbuttontoscanthefirst
satelliteinthelist.
Analogue: IfAnalogue broadcastsearchoption is
turnedon,theTVwillsearchforanaloguebroadcasts
afterotherinitialsettingsarecompleted.
After theinitial settings arecompleted TV willstart
to searchfor available broadcastsof the selected
broadcasttypes.
Whilethesearchcontinues currentscanresultswill
bedisplayedatthebottomofthescreen.Afterallthe
availablestationsarestored,Channels menuwillbe
displayed.Youcaneditthechannellistaccordingto
yourpreferencesusingtheEdittaboptionsorpress
theMenubuttontoquitandwatchTV.
Whilethesearchcontinuesamessagemayappear,
askingwhetheryouwanttosortchannelsaccording
totheLCN(*).SelectYesandpressOK toconfirm.
(*) LCN is the Logical Channel Number system that organizes
available broadcasts in accordance with a recognizable
channel number sequence (if available).
Note: Do not turn off the TV while initializing first time
installation. Note that, some options may not be available
depending on the country selection.
Using Satellite Channel Table Feature
You can performthese operations usingthe Set-
tings>Installation>Satellite Settings>Satellite
Channel Tablemenu.Therearetwooptionsregarding
tothisfeature.
You candownload orupload satellitechannel table
data.InordertoperformthesefunctionsaUSBdevice
mustbeconnectedtotheTV.
Youcanuploadcurrentservicesandrelatedsatellites
&transpondersinTV,toaUSBdevice.
Additionally youcan download oneof the satellite
channeltablefilesstoredinUSBdevice,totheTV.
Whenyouselectoneofthesefiles,allservicesand
related satellitesand transponders inthe selected
filewillbestoredintheTV.Ifthereareanyinstalled
terrestrial,cable and/oranalogueservices, theywill
bekeptandonlysatelliteserviceswillberemoved.
Afterwards, checkyour antenna settingsand make
changesifnecessary.Anerrormessagestating“No
Signal”maybedisplayediftheantennasettingsare
notconfiguredproperly.
Media Playback via USB Input
You can connect 2.5” and 3.5” inch (HDD with external power
supply) external hard disk drives or USB memory stick to your
TV by using the USB inputs of the TV.
IMPORTANT!Backupthefilesonyourstoragedevices
beforeconnectingthemtotheTV.Manufacturerwill
notberesponsibleforanyfiledamageordataloss.
Certain typesof USB devices(e.g. MP3 Players)
orUSB harddisk drives/memorysticks maynot be
compatiblewiththisTV.TheTVsupportsFAT32and
NTFSdiskformattingbut recordingwillnotbeavailable
withNTFSformatteddisks.
While formattingUSB hard driveswhich have
morethan 1TB(Tera Byte)storage spaceyou may
experiencesomeproblemsintheformattingprocess.
Waitalittlewhilebeforeeachpluggingandunplugging
astheplayermaystillbereadingfiles.Failuretodo
so maycause physical damageto the USB player
andtheUSBdeviceitself.Donotpulloutyourdrive
whileplayingafile.
You canuseUSB hubswith yourTV’sUSBinputs.
ExternalpowersuppliedUSBhubsarerecommended
insuchacase.
It isrecommended to usethe TV’sUSB input(s)
directly,ifyouaregoingtoconnectaUSBharddisk.
Note: When viewing image files the Media Browser menu
can only display 1000 image files stored on the connected
USB device.
USB Recording
Recording a Programme
IMPORTANT: When using anew USB harddisk
drive, itis recommended thatyou first format the
English-14-
disk usingyour TV’sFormat Disk optionin the
TV>Recordings>Settingsmenu.
Torecordaprogramme,youshouldfirstconnectaUSB
disktoyourTVwhiletheTVisswitchedoff.Youshould
thenswitchontheTVtoenabletherecordingfeature.
TouserecordingyourUSBdriveshouldhave2GBfree
spaceandbeUSB2.0compatible.IftheUSBdrive
isnotcompatibleanerrormessagewillbedisplayed.
Torecordlongdurationprogrammessuchasmovies,it
isrecommendedtouseUSBHarddiskdrives(HDD’s).
Recordedprogrammesaresavedintotheconnected
USBdisk.Ifdesired, youcanstore/copyrecordings
onto acomputer; however,these fileswill not be
availabletobeplayedon acomputer.Youcanplay
therecordingsonlyviayourTV.
LipSyncdelaymayoccurduringthetimeshifting.Radio
recordissupported.TheTVcanrecordprogrammes
uptotenhours.
Recordedprogrammesaresplitinto4GBpartitions.
IfthewritingspeedoftheconnectedUSBdiskisnot
sufficient,therecordingmayfailandthetimeshifting
featuremaynotbeavailable.
Itis recommendedto useUSB harddiskdrives for
recordingHDprogrammes.
DonotpullouttheUSB/HDDduringarecording.This
mayharmtheconnectedUSB/HDD.
IftheACcordisunpluggedwhilethere isanactive
USB-recordingtimersetting,itwillbecancelled.
Multipartitionsupportisavailable.Amaximumoftwo
differentpartitions are supported.The first partition
of theUSB disk isused for USB Recordingready
features. Italso must beformatted as the primary
partition tobe used forthe USB Recording ready
features.
Somestreampacketsmaynotberecordedbecause
ofsignalproblems,asaresultsometimesvideosmay
freezeduringplayback.
Record,Play,Pause,Display(forplaylistdialogue)keys
cannotbeusedwhenteletextison.Ifarecordingstarts
fromtimerwhenteletextison,teletextisautomatically
turnedoff.Alsoteletextusageisdisabledwhenthere
isanongoingrecordingorplayback.
Whilerecordingaprogrammeinthebackgroundyou
canusemenuoptions,switchtoanothersourceoruse
Media Browser functions, suchas viewingpictures,
playingvideoandmusicfiles,andevenplaybackthe
ongoingrecording.
Timeshift Recording
Press Pausebutton while watchinga broadcast to
activatetimeshiftingmode.Intimeshiftingmode,the
programmeispausedandsimultaneouslyrecordedto
theconnectedUSBdisk.
Press Playbutton again toresume the paused
programmefromwhereyoustopped.PresstheStop
button tostop timeshift recordingand return to the
livebroadcast.
Timeshiftcannotbeusedwhileinradiomode.
Youcanusethetimeshiftrewindfeatureafterresuming
normalplaybackorfastforwardoption.
Instant Recording
Press Recordbutton to startrecording an event
instantly whilewatching a programme.Press Stop
buttontocancelinstantrecording.
You can notswitch broadcasts duringthe recording
mode. Whilerecording a programmeor during the
timeshifting,awarningmessageappearsonthescreen
ifyourUSBdevicespeedisnotsufficient.
Watching Recorded Programmes
Select Recordings from the TVmenu. Select a
recorded itemfrom the list(if previously recorded).
PresstheOKbuttontoviewtheOptions menu.Select
anoptionthenpressOKbutton.
Note: Viewing main menu and menu items will not be available
during the playback.
PresstheStopbuttontostopaplaybackandreturn
totheRecordings.
Slow Forward
Ifyou press Pausebutton whilewatching recorded
programmes,theslowforwardfeaturewillbeavailable.
You canuse Fast Forward buttonto slowforward.
Pressing Fast Forward button consecutivelywill
changeslowforwardingspeed.
Recording Settings
Youcanconfigureyourrecordingpreferencesusing
the Settingstab in theTV>Recordings menu.
HighlightSettingstabbyusingLeftorRightbutton
andpressOK.Thenselectthedesired iteminthe
sub-menuandsetbyusingLeftorRightbutton.
Start early:Youcanset recordingtimer’sstarting
timetostartearlierbyusingthissetting.
End late:Youcansetrecordingtimer’sendtimeto
endlaterbyusingthissetting.
Max Timeshift:Thissetting allowsyouto setthe
maximum durationfor the timeshiftrecording.
Availableoptions are approximateand the actual
recordingtimemaychangeinpracticedependingon
thebroadcast.Thereservedandfreestoragespace
valueswillchangeaccordingtothissetting.Make
sure thatyou have enoughfree space otherwise
instantrecordingmaynotbepossible.
Auto discard:You can setthe Discard type as
None, Oldest,LongestorShortest. If itis not
settoNone,you cansettheUnplayedoptionas
IncludedorExcluded.These options determine
thepreferencesfordeletingtherecordingsinorder
toobtainmorestoragespaceforongoingrecords.
Hard disk information: You canview detailed
informationabouttheUSBstoragedeviceconnected