User Guide

English-11-
Connections
Connector Type Cables Device
VGA
Connection
(back)
AUDIO IN
PC/YPbPr
Audio
Connection
(back)
YPbPr/PCAudioCable
HDMI
Connection
(side&back)
SPDIF
SPDIF
(Optical Out)
Connection
(back)
BACK AV
Back AV
(Audio/Video)
Connection
(back)
AudioVideoCable
HEADPHONE
Headphone
Connection
(side)
YPBPR
YPbPr Video
Connection
(back)
PCtoYPbPrConnectionCable
USB
Connection
(side)
CI
Connection
(side)
CAM
module
LAN
Ethernet
Connection
(back)
LAN/EthernetCable


See the illustrations on the left
side. You can use YPbPr to VGA
cable to enable YPbPr signal via
VGA input. You cannot use VGA
and YPbPr at the same time. To
enable PC/YPbPr audio, you will
need to use the back audio inputs
with a YPbPr/PC audio cable for
audio connection. When using
the wall mounting kit (available
from a third party in the market,
if not supplied), we recommend
that you plug all your cables into
the back of the TV before mounting
on the wall. Insert or remove the
CI module only when the TV is
SWITCHED OFF. You should refer
to the module instruction manual
for details of the settings. The/
Each USB input of your TV supports
devices up to 500mA. Connecting
devices that have current value
above 500mA may damage your TV.
When connecting equipment using a
HDMI cable to your TV, to guarantee
sufficient immunity against parasitic
frequency radiation, you have to use
a high speed shielded (high grade)
HDMI cable with ferrites.
IfyouwanttoconnectadevicetotheTV,makesurethatboththeTVandthedeviceareturnedoffbeforemaking
anyconnection.Aftertheconnectionisdone,youcanturnontheunitsandusethem.
English-12-
Switching On/Off
To Switch the TV On
Connectthepowercordtoapowersourcesuchasa
wallsocket(220-240VAC,50Hz).
ToswitchontheTVfromstandbymodeeither:
 Press theStandby button, Programme +/-ora
numericbuttonontheremotecontrol.
 PressthecontrolbuttonontheTV.
To Switch the TV Off
 PresstheStandby buttonontheremotecontrol.
 Press thecontrol button onthe TV, the function
optionsmenu will bedisplayed.The focus willbe
ontheStandbyoption.Pressandholdthebutton
forabout2secondstoactivatethisoption.Theicon
colour ofthe option willchange. Then pressthe
buttononceagain,theTVwillswitch intostandby
mode.
To power down the TV completely, unplug the
power cord from the mains socket.
Note: When the TV is switched into standby mode, the standby
LED can blink to indicate that features such as Standby Mode
Search, Over Air Download or Timer is active. The LED can
also blink when you switch on the TV from standby mode.
First Time Installation
When turnedon for thefirst time, the language
selection screenis displayed. Selectthe desired
language andpress OK. Inthe following steps of
theinstallationguide,setyourpreferencesusingthe
directionalbuttonsandOKbutton.
Afterthelanguageselection,youwillbeaskedwhether
you wantto change accessibilitysettings. Highlight
YesandpressOKtochange.RefertoSystem Menu
Contentsectionfordetailedinformationonavailable
options.
Set yourcountry preference onthe next screen.
DependingontheCountryselectionyoumaybeasked
tosetandconfirmaPINatthispoint.TheselectedPIN
cannotbe0000.Youhavetoenteritifyouareasked
toenteraPINforanymenuoperationlater.
YoucanactivateStore Modeoptioninthenextstep.
ThisoptionwillconfigureyourTV’ssettingsforstore
environmentanddependingontheTVmodelbeing
used,thesupportedfeaturesofitmaybedisplayedon
thescreenasaninfobanner.Thisoptionisintended
onlyforstoreuse.ItisrecommendedtoselectHome
Modeforhomeuse.Thisoption willbeavailablein
Settings>System>Moremenuandcanbeturnedoff/
onlater.MakeyourselectionandpressOKtocontinue.
The picturemode selection screenwill then be
displayed. Inorder for yourTV to consumeless
energyand bemore environmentallyfriendly select
NaturalandpressOKtocontinue.Youcanchange
your selectionlater using theMode option inthe
Settings>Picturemenu.
DependingonthemodelofyourTVandthecountry
selection Privacy Settings menu mayappear at
thispoint.Usingthismenuyoucansetyourprivacy
privileges. Highlighta feature anduse Left and
Rightdirectionalbuttonsto enableordisable.Read
the relatedexplanations displayed onthe screen
for eachhighlighted feature beforemaking any
changes.You canuse Programme +/-buttonsto
scroll upand down toread the entire text.You will
be ableto change yourpreferences at any time
later fromthe Settings>System>Privacy Settings
menu.IftheInternet Connectionoptionisdisabled
Network/Internet Settingsscreen will beskipped
and notdisplayed. If youhave any questions,
complaints orcomments regarding thisprivacy
policyoritsenforcement,pleasecontactbyemailat
[e-mail].
Hghlght Next and pressOK button onthe remote
controltocontinueandtheNetwork/Internet Settings
menuwillbedisplayed.PleaserefertoConnectvty
sectontoconfgureawredorawrelessconnecton.
IfyouwantyourTVtoconsumelesspowernstandby
mode, youcan dsable the Networked Standby
Mode optonby settng tas Off.After thesettngs
are completedhghlght Next andpress OK button
tocontnue.
On nextscreen you canset broadcast types tobe
searched, setyour encrypted channelsearching
andtimezone(dependingonthecountryselection)
preferences.Additionally youcan set abroadcast
typeasyourfavouriteone.Prioritywillbegiventothe
selected broadcasttype during thesearch process
andthechannelsofitwillbelistedonthetopofthe
channellist.Whenfinished,highlightNextandpress
OKtocontinue.
About Selecting Broadcast Type
Toturnasearchoptionforabroadcasttypehighlight
itandpressOK.Thecheckboxnexttotheselected
optionwillbechecked.Toturnthesearchoptionoff
clearthecheckboxbypressingOKaftermovingthe
focusonthedesiredbroadcasttypeoption.
Digital Aerial:If D. Aerialbroadcast searchoption
isturnedon, theTVwillsearchfor digitalterrestrial
broadcastsafterotherinitialsettingsarecompleted.
Digital Cable:IfD. Cablebroadcastsearchoption
is turnedon, theTV will search fordigital cable
broadcastsafterotherinitialsettingsarecompleted.
Amessagewillbedisplayedbeforestartingtosearch
askingifyouwanttoperformcablenetworksearch.If
youselectYesandpressOKyoucanselectNetwork
orset valuessuchas Frequency,Network IDand
Search Step on the nextscreen. If youselectNo
and pressOKyoucansetStart Frequency, Stop
Frequency andSearch Step onthe next screen.