User Guide

English-15-
toyourTV.HighlightandpressOKtoseeandpress
Back/Returntoclose.
Format Disk: Ifyouwanttodeleteallfilesonthe
connectedUSBstoragedeviceandconvertthedisk
formattoFAT32,youcanusethisoption.PressOK
buttonwhiletheFormat Diskoptionishighlighted.
A menuwill appear onthe screen, requiring you
to enterthe PIN(*).After youenter the PIN, a
confirmationmessagewillbedisplayed.SelectYes
andpressOKtostartformattingthe USBstorage
device.SelectNoandpressOKtocancel.
(*) Default PIN could have been set to 0000 or 1234. If you
have defined the PIN(is requested depending on the country
selection) during the First Time Installation use the PIN
that you have defined.
IMPORTANT: Formatting yourUSB drivewill erase
ALLthedataonitandit’sfilesystemwillbeconverted
toFAT32.Inmostcasesoperationerrorswillbefixed
afteraformatbutyouwillloseALLyourdata.
If “USB disk writing speed too slow to record”
messageisdisplayedonthescreenwhilestartinga
recording,tryrestartingtherecording.Ifyoustillget
thesameerror,itispossiblethatyourUSBdiskdoes
not meetthe speed requirements.Tryconnecting
anotherUSBdisk.
Media Browser
Youcanplaybackmusicandmoviefilesanddisplay
photo filesstored on aUSB storage device by
connectingittoyourTV.ConnectaUSBstoragedevice
tooneoftheUSBinputslocatedonthesideoftheTV.
After connectinga USB storagedevice to yourTV
Media Browsermenuwillbedisplayedonthescreen.
You can accessthe content ofthe connected USB
deviceanytimelaterfromtheSourcesmenu.Select
therelatedUSBinputoptionfromthismenuandpress
OK.You canalso press the Sourcebutton on the
remoteandthenselectyourUSBstoragedevicefrom
thelistofsources.Thenselectthefileofyourchoice
andpressOKtodisplayorplayitback.
You can setyour Media Browser preferencesby
using theSettings menu. Settingsmenu can be
accessedviatheinformationbarwhichisdisplayed
onthebottomofthescreenwhileplayingbackavideo
fileordisplayingapicturefile.PresstheInfobutton
iftheinformationbarhasdisappeared,highlightthe
gear wheelsymbol positioned onthe right side of
theinformationbarandpressOK.Picture Settings,
Sound Settings,Media Browser Settingsand
Optionsmenuswillbeavailable.Thecontentofthe
Settingsmenumaychangeaccordingtothetypeof
thecurrentlyopenmediafile.OnlySound Settings
menuwillbeavailablewhileplayingbackaudiofiles.
Loop/Shuffle Mode Operation
Startplaybackandactivate
Allfilesinthelistwillbe
continuouslyplayedin
originalorder
Startplaybackandactivate

Thesamefilewillbe
playedcontinuously
(repeat)
Startplaybackandactivate
Allfilesinthelistwillbe
playedonceinrandom
order
Startplaybackandactivate
,
Allfilesinthelistwillbe
continuouslyplayedin
thesamerandomorder
Tousethefunctionsontheinformationbarhighlightthe
symbolofthefunctionandpressOK.Tochangethe
statusofafunctionhighlightthesymbolofthefunction
andpressOKas muchasneeded.Ifthesymbol is
markedwitharedcross,thatmeansitisdeactivated.
Custom Boot Up Logo
YoucanpersonalizeyourTVandseeyourfavourite
imageorphotoonthescreeneachtimeyourTVboots
up.Todothis,copyyourfavouriteimagefilesintoa
USBdiskandopenthemintheMedia Browser.Select
USB inputfrom the Sourcesmenu and press OK.
Whenyouhavechosenthedesiredimage,highlight
it andpress OK toview it infullscreen. Press the
Infobutton,highlight thegearwheel symbolonthe
informationbar and pressOK. SelectOptions and
press OKto enter.Set Boot Logo option will be
available.HighlightitandpressOKagaintochoosethe
imageascustombootlogo.Aconfirmationmessage
willbedisplayed.SelectYesandpressOKagain.If
theimageissuitable(*)youwillseeitonthescreen
duringtheTV’snextbootup.
Note: If you perform a First Time Installation the TV will
return to using the default logo, if any.
(*) Images should be in jpeg file formats. Only files with sizes
no greater then 4MB are supported. FollowMe TV
Withyourmobiledeviceyoucanstreamthecurrent
broadcast fromyour smartTV using the FollowMe
TV feature.Install the appropriateSmart Center
applicationtoyourmobiledevice.Starttheapplication.
Forfurtherinformationonusingthis featurereferto
theinstructionsoftheapplicationyouuse.
Note: Depending on model, your TV may not support this
function. The application may not be compatible with all mobile
devices. UHD (4K, Ultra HD) channels are not supported and
both of the devices must be connected to the same network.
CEC
This functionallows to controlthe CEC-enabled
devices,that areconnectedthrough HDMIports by
usingtheremotecontroloftheTV.
The CECoption in the Settings>System>Device
SettingsmenushouldbesetasEnabledatfirst.Press
theSourcebuttonandselecttheHDMIinputofthe
English-16-
connectedCECdevicefromtheSources Listmenu.
WhennewCECsourcedeviceisconnected,itwillbe
listedin sourcemenu withits ownnameinstead of
theconnectedHDMIportsname(suchasDVDPlayer,
Recorder1etc.).
TheTVremote isautomatically abletoperform the
mainfunctionsaftertheconnectedHDMIsourcehas
beenselected.Toterminatethisoperationandcontrol
theTVviatheremoteagain,pressandholdthe“0-
Zero”buttonontheremotecontrolfor3seconds.
YoucandisabletheCECfunctionalitybysettingthe
related optionunder the Settings>System>Device
Settings menuaccordingly.
TheTVsupportsARC(AudioReturnChannel).This
featureisanaudiolinkmeanttoreplaceothercables
betweentheTVandanaudiosystem(A/Vreceiveror
speakersystem).
WhenARCisactive,theTVwillmuteitsotheraudio
outputs, exceptthe headphone jack,automatically
andvolumecontrolbuttonsaredirectedtoconnected
audiodevice.ToactivateARCsettheSound Output
optioninthe Settings>SoundmenuasHDMI ARC.
Note: ARC is supported only via the HDMI2 input.
System Audio Control
AllowsanAudioAmplifier/Receivertobeusedwiththe
TV.Thevolumecanbecontrolledusingthe remote
control ofthe TV. To activate thisfeature set the
Sound Outputoptioninthe Settings>Soundmenu
asHDMI ARC.WhenHDMI ARCoptionisselected,
CEC optionwillbesetasEnabled automatically,ifit
isnotalreadyset.TheTVspeakerswillbemutedand
thesoundofthewatchedsourcewillbeprovidedfrom
theconnectedsoundsystem.
Note: The audio device should support System Audio Control
feature.
E-Manual
YoucanfindinstructionsforyourTV’sfeaturesinthe
E-Manual.
ToaccesstheE-Manual,enterSettingsmenu,select
ManualsandpressOK.ForquickaccesspressMenu
buttonandthenInfobutton.
By usingthe directional buttonsselect a desired
category. Every categoryincludes different topics.
SelectatopicandpressOKtoreadinstructions.
ToclosetheE-ManualscreenpresstheExitorMenu
button.
Note: Depending on model, your TV may not support this
function. The contents of the E-Manual may vary according
to the model.