OPERATING INSTRUCTIONS WP1640DVD COLOUR TELEVISION WITH REMOTE CONTROL BE WALKER WISE...logon to www.walker.
Contents Features ................................................................. 2 Accessories ............................................................ 2 Introduction ............................................................. 2 Preparation ............................................................. 2 Safety Precautions ................................................. 3 Power.................................................................. 3 Power Cord ..........................................
Features Accessories • Remote controlled colour LCD TV. • Fully integrated digital TV (DVB-T - MPEG2) (DVB-TMPEG4). INFO SLEEP • HDMI connectors for digital video and audio. This connection is also designed to accept high definition signals. SCREEN SOURCE PRESETS MENU RETURN Batteries: 2 X AAA • USB input. • 200 programmes from VHF, UHF(analogue). • 1000 programmes for digital mode (IDTV). • Integrated tuner DVB-T HD, MPEG 2 / MPEG 4 compatible. FAV LANG. SUBTITLE EPG / • OSD menu system.
Safety Precautions Please read the following recommended safety precautions carefully for your safety. Power • Always use the provided AC adaptor. • Operate only from the power source specified on the AC adaptor. • The power adaptor may become hot during normal operation. This is not a malfunction. • Please make sure that the adaptor is not covered while in operation. Leave a space of 15 cm (minimum) around the AC adaptor.
For more information, please contact the local authority or the dealer where you purchased the product. Disconnecting the Device The mains plug is used to disconnect TV set from the mains and therefore it must remain readily operable. Headphone Volume Excessive sound pressure from earphones and headphones can cause hearing loss.
Overview of the Remote Control 1. Standby 2. Image size INFO 3. Sleep timer 4. Numeric buttons 5. Return / Exit (in DTV mode) / Index page (in TXT mode) SLEEP SCREEN SOURCE PRESETS 6. Cursor up / Page up (in TXT mode) 7. Cursor left 8. Programme up (Page down in DTV mode) 9. Programme down (Page up in DTV mode) 10. Mono-Stereo / Dual I-II / Current language (in DTV mode) (*) 11. Previous Programme / Swap RETURN 12. Electronic programme guide (in DTV mode) MENU 13. Info / Reveal (in TXT mode) 14.
LCD TV and Operating Buttons 1. Standby button 2. TV/AV button 3. Programme Up/Down buttons P\CH TV/AV 4. Volume Up/Down buttons MENU Note: Press / buttons at the same time to view main menu. Viewing the Connections- Back Connectors DC IN (12V) ANT. 5VDC 60mA 1. SCART socket inputs or outputs for external devices. Connect the SCART cable between SCART socket on TV and SCART socket on your external device (such as a decoder, a VCR or a DVD player).
4. S/PDIF Out outputs digital audio signals of the currently watched source. Use an S/PDIF coaxial cable to transfer audio signals to a device that has S/PDIF input.You should also set SPDIF Out option in the Sound Menu as On. 5. RF Input connects to an antenna or a cable. Note that if you use a decoder or a media recorder, you should connect the aerial cable through the device to the television with an appropriate antenna cable, as shown in the illustrationin the following pages. V+ V+ 6.
Aerial Connection • Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV. • Set the resolution that suits your viewing requirements. Resolution information can be found in the appendix parts. Audio Inputs PC Input PC audio cable (not supplied) to AUDIO INPUTS on the TV DC IN (12V) PC RGB cable (not supplied) to PC input ANT. 5VDC 60mA Using Side USB Input • You can connect USB devices to your TV by using the USB input of the TV.
Using Side AV Connectors You can connect a range of optional equipment to your LCD TV. Possible connections are shown below. Note that cables shown in the illustration are not supplied. • For connecting a camcorder, connect to the VIDEO IN socket and the AUDIO SOCKETS. For selecting the related source, see the section “Input selection” in the following parts. • To listen the TV sound from headphones, connect to the HEADPHONE jack of theTV.
• Press the “ ” button, P+ / P- or a numeric button on the remote control. • Press the -P/CH or P/CH+ button on the TV. The TV will then switch on. Note: If you switch on your TV via PROGRAMME UP/DOWN buttons on the remote control or on the TV set, the programme that you were watching last will be reselected. Basic Operations You can operate your TV using both the remote control and onset buttons. Operation with the Buttons on the TV Volume Setting By either method the TV will switch on.
Initial Settings When the TV is turned on for the first time, the menu for the language selection appears on the screen. The message “Welcome please select your language!” is displayed in all language options sequentially in the OSD. process. The following OSD will be displayed during the automatic search: By pressing the “ ” or “ ” buttons highlight the language you want to set and press OK button. You can get information about the menu usage by pressing INFO button.
terrestrial television broadcasting..Information Banner Numeric buttons (Jump): go to preferred channel directly via numeric buttons. • Whenever you change the channel using the P + or P - button or numeric buttons, the TV displays the broadcast picture along with an information banner at the bottom of the screen. This will remain on the screen for approximately a few seconds. SWAP: Jump to current broadcast.
• When the TELETEXT ( ) button is pressed, the TV returns to television broadcasting. • With digital terrestrial broadcasting (DVB-T), in addition to digital teletext broadcasting together with the normal broadcasting, there are also channels with just digital teletext broadcasting. Navigating the Entire Channel List • Press “ ” or “ ” keys for selecting the previous or next channel. • You can press page down.
Press “OK’ button to delete the highlighted channel in the channel list. Then the message below appears on the screen. Renaming channels To rename a specific channel, the channel must be highlighted via pressing “ ” or “ ” buttons and then highlight the “Edit Name” item by pressing “ ” or “ ” buttons. Press “OK” button to activate rename feature. Adding a Channel to a Favourites List By pressing “ ” or “ ” buttons, highlight the channel that you want to add to the favourite list.
Start: Starting time is entered via the Left/Right or the numeric buttons. End: Ending time is entered via the Left/Right or the numeric buttons. Duration: Displays the duration of the recording. Duration item will be automatically displayed after the starting and ending times are entered. Change / Delete: permits or prohibits any modifications for other users. You can save the adjustments by pressing the GREEN key or cancel the process by pressing the RED button.
• Use “ ” or “ ” buttons to highlight Parental Control. Press OK button to enter Parental Control menu. A dialog box asking for the lock key is displayed: There is only one key which is set to “0000” initially. Enter lock key. If wrong lock key is entered, the “WRONG PIN” message will be displayed on the screen and the TV returns to the previous menu.
Dolby Digital Preferred Language (Optional) In the Configuration Menu, highlight the Dolby D item by pressing “ ” or “ ” buttons. Use the “ ” or “ ” buttons to set the Dolby Digital as On or Off. If the By pressing the “ ” or “ ” buttons the preferred audio description language is being changed. This setting can be used, only if it is available. channel that you are watching supports Dolby Digital and Dolby Digital Plus, you can turn this setting on.
Language Settings Selecting No cancels automatic search. After search is completed for digital channels, a message asking whether to search for analogue channels appears on the screen: Highlight Yes and press OK button to search for analogue channels. The following menu appears on the screen for analogue channel search: . Use “ ” or “ ” buttons to highlight the menu item that will be adjusted and then press “ ” or “ ” button to set. • Audio Language is used for selecting the soundtrack of a channels.
Media Browser (in DTV mode) Whenever you plug a USB flash disk to your TV, the following message will be displayed on the screen: Press OK to cancel. Select Yes by pressing “ ” or “ ” button and press OK to delete all of the channels. First Time Installation The user can use this item to load default settings, which were loaded to the receiver at the factory.
Shuffle (INFO) : Plays the files randomly. If shuffle mode is enabled, previous/next functions will also jump to the tracks randomly. Loop (BLUE) : Plays the selected file repeatedly. Skip backvard / Skip forward ( / button) Viewing JPEG Files Video Playback (optional) Play ( Stop ( button) : Starts the video playback. button) : Stops the video playback. Pause ( button) : Pause the video playback. Rewind ( button) : Goes backward. Forward ( button) : Goes forward.
Press “ ” or “ ” button to select Film Mode. Analogue TV Menu System Press “ ” or “ ” button to set this feature On or Off. Picture Menu Turn this feature on when you are watching. films to see the fast motion scenes clearly. Game Mode (optional) Select Game Mode by pressing “ ” or “ ” button. Use “ ” or “ ” button to set Game Mode as On or Off. When Game Mode is set to On, specific game mode settings, which are optimized for better video quality, will be loaded.
Equalizer Press “ ” or “ ” button to select Equalizer. Press “ ” button to view equalizer menu. or Dual II mode, only if the selected channel supports that mode. AVL Automatic Volume Limiting (AVL) function adjusts the sound to obtain fixed output level between programmes (For instance, volume level of advertisements tend to be louder than programmes). Press “ ” or “ ” button to select AVL. Press “ ” or “ ” button to set the AVL as On or Off. Spdif Out Press “ ” or “ ” button to select Spdif Out.
Use “ ” or “ ” button to set the Child Lock On or Off. When On is selected, the TV can only be controlled by the remote control handset. In this case the control panel buttons will not work. Hence, if one of those buttons is pressed, Child Lock On will be displayed on the screen when the menu screen is not visible. Language Ext Out should be On in order to use Timers function in the DTV mode.
Sound System Press “ ” or “ ” button to select Sound System. Press “ ” or “ ” button to change the sound system to BG,DK, I, L or L’. Fine Tune Press “ ” or “ ” button to select Fine Tune. Press “ ” or “ ” button to adjust the tuning. Search Press “ ” or “ ” button to select Search. Use “ ” or “ ” button to start programme searching. You can also enter the desired frequency using the numeric buttons while Search item is highlighted. Press “ ” or “ ” button to select Store.
Country PC Position Menu Press “ ” or “ ” button to select your country. If you want to exit from A.P.S. function, press the BLUE button. Select the first icon by pressing “ ” or “ ” button. PC Position menu appears on the screen: When you press OK or RED button for starting automatic tuning, all stored programmes will be erased and the TV will search for available channels.
PC Picture Menu For adjusting PC picture items, do the following: Press “ ” or “ ” button to select the second icon. PC Picture menu appears on the screen. Brightness, Contrast, Colour and Colour Temperature settings in this menu are identical to settings defined in TV picture menu under “Analogue TV Menu System”. Note: If you set Colour Temp as User, you can define R, G, B settings manually. device, the TV automatically changes the ZOOM mode according to the WSS signal.
Subtitle This zooms up the wide picture (16:9 aspect ratio) with subtitles to the full screen. Teletext Teletext system transmits information such as news, sports and weather on your TV. Note that is the signal degrades, for example in poor/adverse weather conditions, some text errors may occur or the teletext mode may be aborted. Teletext function buttons are listed below: “ Zoom ” Teletext/Mix Activates teletext mode when pressed once. Press again to place the teletext screen over the programme (mix).
Remote Control Tips Screen Care Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the coating layer of the TV screen. For your safety, unplug the mains plug when cleaning the set. When moving the TV, hold it properly from the bottom part. Image Persistence Your TV no longer responds to the remote control. Perhaps the batteries are exhausted. If so you can still use the local buttons at the bottom of the TV.
Appendix A: PC Input Typical Display Modes Appendix B: AV and HDMI Signal Compatibility (Input Signal Types) The display has a maximum resolution of 1600 X 1200. The following table is an illustration of some of the typical video display modes. Your TV may not support different resolutions. Supported resolution modes are listed below. If you switch your PC to an unsupported mode, a warning OSD will appear on the screen.
Appendix C: Supported File Formats for USB Mode Media Movie (optional) File Extension .avi Format Audio (Maximum resolution/Bit rate etc.) XviD/ 3ivx PCM/MP3 XviD Verson up to: 1.1.2 MPEG4 PCM/MP3 MS ISO MPEG4 PCM/MP3 Support SP and ASP PCM Sample Rate: 8K ~ 48KHz Music Remarks Video - MPEG 1/2 .mp3 - Baseline JPEG Photo .jpg Progressive JPEG External Subtitles (optional) .srt .
Specifications Transmission Standards: TV BROADCASTING DVB-T, MPEG2,DVB-T, MPEG4 HD PAL/SECAM B/G D/K K’ I/I’ L/L’ i. DEMODULATION RECEIVING CHANNELS -Symbol rate: COFDM with 2K/8K FFT mode. VHF (BAND I/III) UHF (BAND U) -Modulation: 16-QAM - 64-QAM FEC for all DVB modes (automatically found) HYPERBAND ii. VIDEO NUMBER OF PRESET CHANNELS -H.264 (MPEG-4 part 10) main and high profile level 4.1/MPEG-2 MP@HL video decoder.
MOBIL TV INSTRUCTION MANUAL Switching the TV On Using 12 Volt 1. Connect the cigarette lighter plug cable to the cigarette lighter socket of your car or a cable with clips to the battery of car, making sure to observe the correct polarity. 2. Plug the other side of 12 volt cable to DC 12 socket at the back of the TV. Then the standby LED lights up. 3. Press the “ ” button, P+ / P- or a numeric button on the remote control or press the “ CH or P/CH+ button on the TV. The TV will then switch on.
Important Instruction For your own safety read following instruction carefully before attempting to connect this unit to the mains supply.
Features Contents Features ............................................................... 34 General Properties............................................ 34 Safety Information ................................................ 35 Notes on Discs ..................................................... 35 On handling discs ............................................. 35 On cleaning....................................................... 35 Licence Notification ..............................................
On cleaning Safety Information CAUTION DVD Player is a class 1 laser product. However this product uses a visible laser beam which could cause hazardous radiation exposure. Be sure to operate the player correctly as instructed. • Before playing, clean the disc with a cleaning cloth. Wipe the disc from the center out. CLASS 1 LASER PRODUCT • Manufactured under license from Dolby Laboratories. “Dolby”, and the double-D symbol are trademarks of Dolby Laboratories.
DVD Control Panel Buttons A. Disc loader B. Play / Pause Plays/pauses the disc. When DVD menu (root menu) is active, this button functions as “button select” (selects the highlighted item in menu) if this is not prohibited by the disc. C. Stop / Eject Stop playing disc / Eject or Load the disc Note: • You cannot eject the disc via the remote control. • While playing a file, you should press STOP button three times to eject. Overview of the Remote Control 1. Standby 2. Numeric buttons INFO 3.
General Operation You can operate DVD, movie CD, music or picture CD’s content by using the proper buttons on your remote control. Below are main functions of commonly used remote control buttons. Buttons on the Remote Control DVD Playback Movie Playback Picture Playback Music Playback Play Play Play Play Pause Pause Pause Pause Stop Stop Stop Stop / e/f / / ANGLE C DISPLAY INFO LANG.
11. Reverse stepping is not available. General Playback 12. For your convenience: Basic Play 1. Press on the power button 2. Please insert a disc to the loader. The disc will be automatically loaded and play commences if the disc does not have any menus recorded on it. A menu may appear on the TV screen after a few moments or the film may start immediately after the introduction of the Film Company. This behaviour depends on the disc content and may change.
Preferences Troubleshooting The picture quality is poor (DVD) • Make sure the DVD disc surface is not damaged. (Scratch, fingerprint etc.) • Clean the DVD disc and try again. See instructions described in “Notes on Discs” to clean your disc properly. DEFAULT • Ensure that the DVD disc is in the drawer with the label uppermost. If you choose RESET and press SELECT, the factorypresets are loaded. Parental level and parental password does not change.
No response from remote control Title Number • Make sure the remote control is in the correct mode. • Check batteries are fitted correctly. These numbers are recorded on DVD discs. When a disc contains two or more movies, these movies are numbered as title 1, title 2, etc. • Change the batteries. Track Number If nothing works These numbers are assigned to the tracks, which are recorded on AudioCDs. They enable specific tracks to be located quickly.
Disc Types Compatible with This Unit D is c Ty p e s (L o g o s ) R e c o r d in g Ty p e s D is c S iz e DVD 12 cm A u d io + V id e o A U D IO -C D 8 cm 12 cm M ax. P la y in g T im e S i n g le s id e d ; 2 4 0 m in . C h a r a c t e r is tic s • D V D c o n ta in s e x c e lle n t s o u n d a n d v id e o • V a r io u s s c r e e n a n d a u d io fu n c t io n s c a n b e D o u b le s id e d ; 4 8 0 m in . S i n g le s id e d ; 8 0 m in . D o u b le s id e d ; 1 6 0 m in . 7 4 m in .
Supported File Formats Media File Extension .mpg/ .dat/ .vob Movie (optional) .avi - Music Format Remarks Video Audio (Maximum resolution/Bit rate etc.) MPEG1 MPEG Layer 1/2/3 MPEG2 MPEG2 XviD/ 3ivx PCM/MP3 MPEG4 PCM/MP3 MS ISO MPEG4 PCM/MP3 Support SP and ASP PCM Sample Rate: 8K ~ 48KHz - XviD Verson up to: 1.1.2 / DivX 3.1.x, 4.x, 5.x MPEG 1/2 .
50177245
