Operation Manual

Specifications
6
MODEL MB
TRANSMISSION (continued)
Neutral Transmission Release by Manual Dump Valve
Final Drive Direct Drive Axle from Transaxle
Transmission Fluid
Factory Service 20W50 Multi-Viscosity Motor Oil (Minimum SL Grade Oil)
Transmission Fluid Capacity 79 fl oz (2336 ml)
Transmission Cooling Cooling Fan Mounted on Drive Pulley
Ground Travel Speed
Forward m.p.h. (km/h)
Reverse m.p.h. (km/h)
0-8 (0-13) Infinitely Variable
0-8 (0-13) Infinitely Variable
BLADE DRIVE
PTO Shaft Sliding Spline Shaft with Two (2) High-Speed U-Joints
Blade Spindle Each Blade (2) Mounts Direct on Peerless Right Angle
Gearbox with Tee Gearbox in Center Connected to PTO Shaft
(Complete Geared Drive, Peerless Model 1000 Gearboxes)
Blade Drive Clutch and Brake Mechanical Clutch with Internal Brake [Stops Blades within Five (5)
Seconds of Disengagement]
Max. Blade Speed
[22 in. (56 cm) Blade] @ 3600
RPM Engine
2900 RPM
[16700 FPM (5090 m/min)]
TIRE SIZE
Deck Caster Wheel 2.80/2.50-4 Pneumatic (4-Ply)
Deck Caster Wheel (Optional) 8 x 3.00-4 Foamed Rubber
Drive 18 x 8.50-10 (4-Ply Low-Profile)
Rear 13 x 6.50-6 (4-Ply)
TIRE PRESSURE
Deck Caster Wheel 20 PSI (137 kPa)
Drive 15 PSI (103 kPa)
Rear
20 PSI (137 kPa)
DIMENSIONS (Tractor and Mower)
Length
82 in. (208 cm)
Width
36 in. (91 cm) SD Model
(with Deflector)
41-3/4 in. (106 cm)
42 in. (107 cm) SD Model
(with Deflector)
47-3/4 in. (121 cm)