Owner's manual

23
O.S. Walker Inc., NEO Permanent Lifting Magnets
SPECIFICATION & SPARE PARTS LIST
Disassembly or repair of this magnet can result in reduced hold-
ing power and/or cause an unsafe condition. Therefore, anytime
the magnet is disassembled beyond the parts list shown in this
manual, the magnet must be re-tested for breakaway force in
accordance with the test described in ANSI/ASME B30.20.
Modi cation of any operating mechanism or structure of this
magnet can reduce the magnet’s effectiveness and/or cause
unsafe conditions.
Repair or modi cation of this magnet should only be done by
O.S. Walker or a Quali ed Person.*
WARNING
* Quali ed Person - A person who by extensive knowledge, training and
experience, has successfully demonstrated the ability to solve or resolve
problems related to Walker lifting magnets. (Walker replacement parts may
be installed by a **Designated Person.)
** Designated Person - A person selected or assigned by the employer as be-
ing competent to replace speci c replacement parts listed in this manual and
is able to verify the proper functioning of the speci c replacement parts and
the entire product after the completion of the installation.
Model No NEO-125 NEO-250 NEO-500 NEO-1000 NEO-2000
Length 3.63” 5.94” 9.69” 12.44” 18.89”
Width 2.31” 3.94” 4.72” 5.79” 6.50”
Height to Hook 4.31” 6.61” 6.61” 8.50” 9.88”
Net Weight 6.2 lbs. 22 lbs. 42 lbs. 80 lbs. 198 lbs.
Rated Lift Cap. 0 - 275 lbs. 0 - 550 lbs. 0 - 1100 lbs. 0 - 2200 lbs. 0 - 4400 lbs.
ITEM
NO.
DESCRIPTION OF PARTS
MODEL
NEO-125 NEO-250 NEO-500 NEO-1000 NEO-2000
1 MAGNET, COMPLETE 64-H44.05.125 64-AXM12426 64-AXM12427 64-AXM12463 64-AXM13175
2 PRODUCT SAFETY/OPERATING
INSTRUCTION LABEL
37-DD15557 37-DD15559 37-DD15561 37-DD15563 37-DD15564
3 LIFTING GUIDELINES LABEL 37-DD15558 37-DD15560 37-DD15562 37-DD15564 37-DD15566
4 HANDLE ASSEMBLY 39-DD16214 39-DD14547 39-DD14547 39-DD14548 39-DD15662
5 HANDLE MOUNTING BLOCK KIT 39-DD16215 39-DD14549 39-DD14549 39-DD14560 39-DD15663
REPAIRS
For repair of your lift magnet, contact O.S. Walker for
you’re nearest Authorized Service Center TOLL FREE at
1-800-W-MAGNET. A return material authorization num-
ber will be issued along with the address of the nearest
Authorized Service Center. Your magnet, after receipt by
the Service Center will be inspected and a free estimate
of repair charges will be provided. Authorization for repairs
from magnet owners must be given to the O.S. Walker
Service Center before repairs are made. Transportation
charges, both to and from the factory, are to be paid by the
magnet owner.