How to Guide

ManualsBrandsWalker Edison ManualsTelevision StandsW60MSBL

Summary of content (19 pages)

PAGE 1
PAGE 2
PAGE 3
PAGE 4
PAGE 5
Screw cam bolts (B) into top panel (1) and panel (7). Insert dowels (A) into panels (9,10).
PAGE 6
Insert dowels (A) into panels (3,4,5). Screw cam bolts (B) into panels (3,4,5). Insert dowels (A) into panels (6,7,8,11). Screw cam bolts (B) into panels (6,7,8,11).
PAGE 7
Attach panel (9) to panel (10) using screws (D).Tighten screws (D) with a screwdriver. Attach panel (5) to panel (9) using cam locks (C).Tighten cam locks (C) with a screwdriver.
PAGE 8
Attach panels (10) to panel (4) using dowels as guides. Attach panels (10) to panel (4) using cam locks (C).Tighten cam locks (C) with a screwdriver.
PAGE 9
Attach panel (4) to panel (5) using dowels as guides. Attach panel (4) to panel (5) using cam locks (C).Tighten cam locks (C) with a screwdriver.
PAGE 10
Attach panel (6) to panel (4) using dowels as guides. Attach panel (6) to panel (4) using cam locks (C).Tighten cam locks (C) with a screwdriver.
PAGE 11
Attach panel (3) to panel (8) using dowels as guides. Attach panel (3) to panel (8) using cam locks (C).Tighten cam locks (C) with a screwdriver.
PAGE 12
Attach panels (3) to panels (6) using dowels as guides.Attach panels (8) to panels (4) using dowels as guides. Attach panel (4) to panel (8) using screws (D).Tighten screws (D) with a screwdriver.
PAGE 13
Attach panel (3) to panel (6) using cam locks (C).Tighten cam locks (C) with a screwdriver. Attach panel (10) to panel (11) using cam locks (C).Tighten cam locks (C) with a screwdriver.
PAGE 14
Attach panel (9) to panel (10) using screws (D).Tighten screws (D) with a screwdriver. Attach panel (7) to panel (9) using cam locks (C).Attach panel (7) to panel (11) using screws (D). Tighten cam locks (C) and screws (D) with a screwdriver.
PAGE 15
Attach panel (7) to panel (3) using dowels as guides. Attach panel (7) to panel (3) using cam locks (C).Tighten cam locks (C) with a screwdriver.
PAGE 16
Attach bottom panel (2) to panels (5,6,7,10) using dowels as guides. Attach bottom panel (2) to panels (5,6,7,10) using screws (D).Tighten screws (D) with a screwdriver.
PAGE 17
Carefully back panels (12,13) into place as guides. Attach back panels (12,13) to the assembly using screws (D).Tighten screws (D) with a screwdriver.
PAGE 18
Carefully fit top panel (1) into place using dowels as guides. Attach top panel (1) to back panel (13) using cam locks (C). Tighten cam locks (C) with a screwdriver.
PAGE 19
Attach top panel (1) to panels (7,8,10) using cam locks (C). Tighten cam locks (C) with a screwdriver.