Item #: BTOT Assembly Instructions For our most current instructions, to request missing, lost or broken parts, or for any other Customer Service issues, please visit our website at www.walkeredison.com or call us at 877-207-5906.
Instruction Manual IMPORTANT INFORMATION READ BEFORE ASSEMBLING THIS PRODUCT Follow the information on the warning labels found on the bunk bed and on the packaging. Do not remove the warning label from the bed. Use only a mattress with the dimensions 74-75 in.L x 37.5-38.5 in.W x 9 in.H on the upper bunk. A mattress with the same dimensions (74-75 in.L x 37.5-38.5 in.W x 9 in.H) is recommended for the lower bunk. The surface of the mattress must be at least 5 in.
Parts List P.
Hardware List P.
Assembly Options Option A Option B To build this option, follow steps 1 through10 then steps 11A through 13A. To build this option, follow steps 1 through10 then steps 11B through 13B. (Ladder Left) (Ladder Right) Option C (Two Twin Beds) This option shows how to separate the bunk bed into two individual twin beds. To build this option, follow steps 14 through 20. P.
Slide post sections (A,B) and post sections (D,E) onto post sections (C). Ensure that the holes of all post sections align as shown above. Secure the post sections from STEP 1 together using small bolts (1) with small washers (2). Tighten small bolts (1) with small wrench (11). P.
Place guardrails (P) between the assembled posts from STEP 2. Repeat this step for both sets of guardrails and posts. Secure guardrails (P) to the assembled posts from STEP 2 using small bolts (1) with small washers (2). Tighten small bolts (1) with small wrench (11). Repeat this step for both sets of guardrails and posts. P.
Attach support legs (N) to crossbars (G,I) using small bolts (1) with small washers (2). Tighten small bolts (1) with small wrench (11). P.
Attach crossbars (F,G,H,I) to corresponding post sections (D,E,A,B) as shown above using small bolts (1) with small washers (2). Tighten small bolts (1) with small wrench (11). P.
Attach crossbars (F,G,H,I) to corresponding post sections (A,B,D,E) as shown above using small bolts (1) with small washers (2). Tighten small bolts (1) with small wrench (11). Ensure that the Manufacturer and Safety Labels are positioned as shown above. P.
F H Insert mattress support bars (O) into the slots of crossbars (F,H). Secure mattress support bars (O) by snapping plastic tab locks (8) into the slots of crossbars (F,H). It may be necessary to apply more pressure to some plastic tab locks than others. Snap plastic links (9) onto mattress support bars (O). P.
G I Insert mattress support bars (O) into the slots of crossbars (G,I). Secure mattress support bars (O) by snapping plastic tab locks (8) into the slots of crossbars (G,I). It may be necessary to apply more pressure to some plastic tab locks than others. Snap plastic links (9) onto mattress support bars (O). P.
Attach ladder rungs (M) to ladder rails (L) using medium bolts (5) with washers (6). Tighten medium bolts (5) with wrench (11). P.
D A H I In this step you will attach guardrail (K) and the ladder to the bunk bed. Attach the top right corner of guardrail (K) to post section (D) using small bolt (1) with small washer (2). Attach the top left corner of the ladder to crossbar (H) using small bolt (1) with small washer (2). Secure guardrail (K) and the top right corner of the ladder to crossbar (H) using large bolts (4) with large washers (3).
D A Secure guardrail (J) to the bunk bed using small bolts (1) with small washers (2) at post sections (A,D), and large bolts (4) with large washers (3) at crossbar (F). Tighten all bolts with wrenches (11,12). P.
H I Insert plastic plugs (10) into crossbars (H,I). Option A Final Assembly P.
D A H I In this step you will attach guardrail (K) and the ladder to the bunk bed. Attach the top left corner of guardrail (K) to post section (A) using small bolt (1) with small washer (2). Attach the top right corner of the ladder to crossbar (H) using small bolt (1) with small washer (2). Secure guardrail (K) and the top left corner of the ladder to crossbar (H) using large bolts (4) with large washers (3).
D A Secure guardrail (J) to the bunk bed using small bolts (1) with small washers (2) at post sections (A,D), and large bolts (4) with large washers (3) at crossbar (F). Tighten all bolts with wrenches (11,12). P.
H I Insert plastic plugs (10) into crossbars (H,I). Option B Final Assembly P.
P.
K Detach guardrail (K) and the ladder from the bunk bed by loosening all connecting bolts as shown above. P.
J Detach guardrail (J) from the bunk bed by loosening all connecting bolts as shown above. P.
A D D A B E E B Loosen and remove the connecting bolts at post sections (A,B,D,E). P.
Carefully lift the upper bunk off the lower bunk. Remove post sections (C) from the bed assembly. P.
Insert plastic end caps (7) into the open ends of the bed posts. P.
Screw bolts (1) into posts (A,D). Insert plastic plugs (10) into both bed frames as shown above. Option C Final Assembly P.
