Instructions/Assembly Guide
Fixez les barres transversales inférieures (10) et les barres transversales supérieures (12,14) aux supports des
extrémités de l’Étape 5 à l’aide de rondelles (E) et de boulons (C) comme illustré. Fixez le garde-corps supérieur (11)
aux poteaux de soutien (1,3) à l’aide de boulons (A) et de rondelles (E) comme illustré. Assurez-vous que les fentes
des barres transversales soient tournées vers l’intérieur comme illustré. Fixez les boulons (A) (C) mais ne les serrez
pas complètement avant l’Étape 13.
Étape 9
Attach lower cross bars (10) and upper cross bars (12,14) to the end supports in Step 5
using washers (E) and bolts (C) as shown in the illustration. Attach upper guardrail (11)
to the supports posts (1,3) using bolts (A) and washers (E) as shown in the illustration.
Ensure the slots on the cross bats are facing inward as shown in the illustration. Secure
bolts (A)(C) but not tighten completely until step #13.