Item # : BS55LD Assembly Instructions For the most current instructions, additional assembly tips, to report damage or request parts, Please visit our website at www.walkeredison.com Revised 10/2017 Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reserved. P.
General Assembly Guidelines I. Ensure that all parts and hardware are available before beginning assembly. II. Follow each step carefully to ensure the proper assembly of this product. III. Two people are recommended for ease in the assembly of this product. IV. The two main types of hardware used to assemble this product are: wood dowels and screws. V. A Phillips head screwdriver is required for the assembly of this product. Copyright © 2016, by Walker Edison Furniture Co., LLC.
Parts List 2 1 3 1 8 4 9 7 1 5 7 1 6 Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reserved. P.
Hardware List A Ø3,5x35mm Screw 8 pcs B Ø5x50mm Screw 16 pcs C Ø6x30mm Wood Dowel 26 pcs D 10x10 Nail 4 pcs E 15x30mm Plastic Foot 4 pcs F Ø10mm Plastic Cap 4 pcs G Ø15mm Plastic Cap 16 pcs H M4mm Hex Key 1 pc Phillips head screwdriver required for assembly (not included) The hardware quantities listed above are required for proper assembly. Some extra hardware may also have been included. Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 1 CC CC CC CC 1 1 1 CC CC 1 CC CC 8 9 7 C C 7 C C 3 6 C C C C 4 5 C C Insert wood dowels (C) into the indicated parts. Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 2 1 3 4 5 B B 1 B 7 6 B 1 B B 8 1 B B H Attach the legs (7) and (8) to the shelves (3), (4), (5) and (6), secure it with the screws (B) and hex key (H). At same time, attach the back rails (1) to the legs (7) and (8), as shown. Step 3 3 4 5 6 7 B B B B 9 B B B B H Attach the legs (7) and (9) to the shelves (3), (4), (5) and (6), secure it with the screws (B) and hex key (H). At same time, attach the back rails (1) to the legs (7) and (9), as shown.
Step 4 3 5 4 6 A Attach the back rails (1) to the shelves (3), (4), (5) and (6), secure it with the screws (A) and a phillips head screwdriver (not included), as shown. Step 5 A A E D 2 E A D E D A E D First, attach the top panel (2) to the unit, secure it with screws (A). After, attach the plastic feet (E) to the pre-assembled legs and secure it with nails (D). Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reserved. P.
F Step 6 F F F G G G G G G G G G G G G G G G Use plastic cap (F) to cover screw heads (A) as desired. Use plastic cap (G) to cover screw heads (B) as desired. Step 7 Final Assembly Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reserved. P.
