Instructions/Assembly Guide

Step 19
P.23
Copyright
©
2020
b
y
Walker Edison Furniture Co., LLC. All rights reserved.
12
12
12
12
U
Insert the assembled drawers into the unit frame, extend the ball bearing slide tracks (U)
on the pedestal side panel all the way forward. Then align the slider runners on the assembled
drawers with the slide tracks and push the drawer carefully inside until it stops.
Note: if the drawer does not go in smoothly, please take it out and repeat the step. If you need
to remove the drawer, please pull the drawer all the way out, press or lift the plastic release
lever and pull out the drawer and the re-assembled the drawer unit it was going in smoothly.