Instructions/Assembly Guide

ManualsBrandsWalker Edison ManualsBar StoolsIndustrial Slat-Back Counter Stool (2-Pack) - Dark Walnut

Table Of Contents

P.1

Assembly Instructions

201

9 b

Walker Edison

Item # : CH26SBMW2

Please visit our website for the most current instructions, assembly tips, report damage,

or request parts. www.walkeredison.com

Revised 30/07/2019 (E)

Summary of content (9 pages)

PAGE 1
Item # : CH26SBMW2 Assembly Instructions TM Walker Edison ® Please visit our website for the most current instructions, assembly tips, report damage, or request parts. www.walkeredison.com Revised 30/07/2019 (E) Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
PAGE 2
General Assembly Guidelines I. Ensure that all parts and hardware are available before beginning assembly. II. Follow each step carefully to ensure the proper assembly of this product. III. Two people are recommended for ease in the assembly of this product. IV. The three main types of hardware used to assemble this product are: wood dowels, screws and bolts. V. The provided glue is to secure wood dowels in place.
PAGE 4
Hardware List A Ø1/4"x12mm Bolt 8 B Ø1/4"x30mm Bolt 10 pcs C M4 Hex key 1 pcs pc Philips head screwdriver required for assembly (not included) The hardware quantities listed above are required for proper assembly. Some extra hardware may also have been included. Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
PAGE 7
Step 3 2 C 4 A A A 7 A B 7 C A 3 B B C Secure bolt (A) into part (7) to part (3) ,bolt (A) into parts (2,4) to part (3) with hex key (C) as per diagram. Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.
PAGE 8
Step 4 1 4 B B 2 B B C B C Secure bolt (B) into parts (2,4) to part (1) with hex key (C) as per diagram. Then fully tighten all the bolts. Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved. P.