Insert wooden dowel (A) into parts (6,7,8) as per diagram.
Insert wooden dowel (A) into parts (2,9) as per diagram.
Using screw (F) attach part (9) to part (2) with Philips head screwdriver as per diagram.
Using screw (E) secure part (2) to part (8) with hex key (M) as per diagram.
Using screw (E) secure part (2) to part (7) with hex key (M) as per diagram.
Secure cam bolt (B) into part (1) with Philips head screwdriver; Attach part (10) to part (3) as per diagram.
Using screw (N) attach part (6) to part (1) with Philips head screwdriver as per diagram.
Insert wooden dowel (A) into parts (4,5). Secure cam bolt (B) to parts (4,5) with Philips head screwdriver. Secure bolt (G) to parts (4,5) as per diagram.
Using cam lock (C) secure parts (2,8) to part (5) with Philips head screwdriver as per diagram.
Using washer (J), nut (K) attach part (3) to part (5) with wrench (L) as per diagram.
Using cam lock (C) secure parts (2,8) to part (4), then using washer (J), nut (K) attach part (3) to part (4) with wrench (L) as per diagram.
Using cam lock (C) secure part (1) to parts (4,5,7,8) with Philips head screwdriver as per diagram.
Place sticker (D) and plastic cover (H) to cover the holes as per diagram.
Put part (11) into unit as per diagram.
Using screw (S) attach Velcro strap (P) to part (1) with Philips head screwdriver as per diagram.
Using screw (Q) attach Velcro strap (P) into Nut (R) to wall with Philips head screwdriver as per diagram.
Position the assembled unit at the desired location, if necessary adjust the floor leveler at the bottom of the support leg to level the unit.
