Instructions/Assembly Guide

Secure front guardrail (13) to crossbar (10) using large bolts (B) and large washers (E). Secure back
guardrail (13) to crossbar (11) using large bolts (B), large washers (E) and, where applicable, angle
brackets (G).* Tighten large bolts (B) with large wrench (L).
*OPTIONAL: Angle brackets (G) can be used to attach the bed to a wall for additional support. You must use hardware
suitable for the particular wall type, which is not included as there are many different wall types. You must also mount the bed
to the structure of the wall (i.e. wood studs, metal studs or cement/brick) directly. DO NOT attach the bed to the surface
of the wall without anchoring into the structural framework of the wall. Please seek professional advice if you are unsure
of your own ability to do this correctly. Walker Edison Furniture Company makes no representation of warranty,expressed
or implied, to the strength of any structure and the wall’s ability to hold your bed. You assume all responsibility and indemnify
Walker Edison Furniture Company of any and all damages that may be incurred by attaching your bed to the wall.