Instructions/Assembly Guide

ManualsBrandsWalker Edison ManualsDesks42" Modern Industrial Mesh Back Cubby Wood Computer Desk - Ash Grey

Table Of Contents

Summary of content (16 pages)

PAGE 1
PAGE 2
PAGE 4
Hardware List A 荨 08x35mm Cam bolt 8 pcs B 邸 015x11mm Cam lock 8 pcs C 仁一五） 08x30mm Wooden dowel 16 pcs ｀ 06x50mm Screw 8 p cs Plastic wedge 4 pcs pcs D E � F 三 03x17mm Screw 4 G 尸 01/4x25mm Bolt 16 pcs H 切 01/4x35mm Bolt 6 pcs 切））））））））））））））））））））））｝ 01/4x47mmm Bolt 3 pcs Hole cover 1 pc Hex Key 1 pc Glue tube 1 pc J K L M Q � I) 4mm ((v Philips head screwdriver required for assembly (not included) The hardware quantities listed above are requi
PAGE 6
Insert wooden dowel (C) into part (6,7,8) , secure cam bolt (A) to part (4) with Philips head screwdriver.
PAGE 7
Attach part (4) onto part (3) , using bolt (G) with hex key (L).
PAGE 8
Insert part (6,7,8) to part (4),then secure cam lock (B)to part (6,7,8) with Philips head screwdriver.
PAGE 9
Insert part (5) to part (4,6,8) as per diagram .
PAGE 10
Using screw (D) attach part (9) to part (6,7,8) to secure with hex key (L) .
PAGE 11
Using bolt (G) to attach part (10,11) to part (9) , insert to part (11) with hex key (L), using bolt (J) insert to part (10) to secure with hex key (L) .
PAGE 12
Using bolt (G,H) attach part (13,6,10,11,12) secure with hex key (L) per diagram .
PAGE 13
Using bolt (G,H) attach part (13) onto part (8,10,11,12) , secure part (8,10,11,12) with hex key (L) per diagram.
PAGE 14
Using screw (F) attach plastic wedge (E) onto part (5) with Philips head screwdriver as per diagram.
PAGE 15
Put the hole cover (K) to part (4), put part (14) to part (2) as per diagram .
PAGE 16