User guide

6. Headphone port.
7. Power/menu button. Pressing and holding the
power/menu button will turn the device on or o.
A short press of the Menu/Power button once will
bring up or remove the menu on the device screen.
8. Reset button.
9. Lanyard loop.
10. USB port for charging the device or upgrading rmware.
11. Charge status LED, if the LED is green then the device
is charged. If the LED is red the device is charging.
12. Volume Down button.
13. Volume Up button.
14. Previous channel.
15. Next channel.
16. Selection Wheel, pushing the selection wheel will
select the on-screen menu item.
6. Headphone port.
7. Power/menu button. Pressing and holding the
power/menu button will turn the device on or o.
A short press of the Menu/Power button once will
bring up or remove the menu on the device screen.
8. Reset button.
9. Lanyard loop.
10. USB port for charging the device or upgrading rmware.
11. Charge status LED, if the LED is green then the device
is charged. If the LED is red the device is charging.
12. Volume Down button.
13. Volume Up button.
14. Previous channel.
15. Next channel.
16. Selection Wheel, pushing the selection wheel will
select the on-screen menu item.
9
Channel Scan
In the event you lose DVB-H reception while in a coverage
area, you will be able to re-acquire the signal by
rescanning for channels by doing the following.
1. Extend the antenna.
2. Click on the Power/menu button.
3. Click the scroll wheel to select the Channel scan option.
4. Click on Channel Scan.
5. You will be prompted to conrm your selection.
6. Click OK.
7. Channel Scan will begin, and once complete will
connect to the last channel viewed.
8. Do not turn o the device while the channel scan is
in progress.
16
fold