Manual

Step 2
Mounting the Monitor Brackets to a TV
First of all, Once you have
determined the correct diameter, please see the diagram as below. You will thread the
Bolt into the TV using the correct Washer(e,f,g), and using the spacer(c,d) if necessary.
Please make sure the Monitor Brackets are vertically centered and level with each
other.
make sure the diameter of the Bolt(h to n) your TV requires.
4
Step 3
Attaching TV to Wall Plate and Adding the Safety Bolts
Warning: Some TVs may require two people to lift! We are not responsible for
personal injury or product damage.
First hook the Monitor Brackets over the top of the Wall Plate, then let the bottom of the
Monitor Brackets rotate to the bottom of the Wall Plate as shown in the below diagram.
Use the screw driver to tighten the safety bolts. Then the Monitor Brackets will sit
behind the bottom tab on the Wall Plate as shown in the diagram.
3.1
3.2
3.3
h to n
e,f,g
c,d
(if necessary)