Owner`s manual

13
✓
Insert the cuff plug into the monitor before taking a
measurement.
Here are some important reminders:
Important Reminders
Take your blood pressure in a comfortable environment -
not too cold, not too hot-as temperature may affect your
measurement.
✓
✓
Sit quietly for about 10 minutes. This will allow your body
to return to its normal, resting state.
Before Taking a Measurement
✓
If you've just consumed beverages containing caffeine
such as coffee, non-herbal tea, or
cola wait about 30-45 minutes.
Also, don't smoke just before
taking a measurement.
............................
Cuff Plug Inflation Bulb
✓
Make sure the cuff is properly assembled before use. To
assemble, insert the end of the cuff marked INDEX into
the metal ring with the velcro side facing out. The smooth
material should be on the inside of the cuff loop.
12
Selecting Time and Date
Your Walgreens monitor will keep track of the time and date
unless the batteries have run down or are removed from the
monitor.
Press the MODE button on the unit. The month will begin to
flash. Press the
(Up) or (Down) button until the
correct month appears on the display.
Press the MODE button once again to store and now the
day will begin to flash. Press the
(Up) or (Down)
button until the correct day appears on the display.
Press the MODE button to store and the hour will begin to
flash. Follow the same process as setting the month and
day to set the hour and minute.
Once you have selected the minute, press the MODE
button. The unit will now display the time and date.
•
•
•
•