Owner's manual

16
Operating Manual Light Control „PULSE HFMD - Vers. IV without MFT“
ENG
Activate setting level 3 (function 3.1 - 3.6)
LED II flashes green
Actuation
Display
LED I depends on the set level
Change function Increase the follow-up time in stages
Briefly press key I
Change the basic settings - Setting level 3
LED I changes to the next colour:
- Level 1 green 5 min
- Level 2 red 10 min
- Level 3 blue 15 min
- Level 4 turquoise 20 min
- Level 5 magenta 25 min
- Level 6 orange 30 min
Change function Reduce follow-up time in stages
Briefly press key II
LED I changes to the next colour
(see above)
LED II
LED I
LED I
Press both keys
once for 10 seconds and
twice for 5 seconds
Fig. 4
Key I
+ LED I
Sensor
Key II
+ LED II
Note: The functions written
in blue are not available.