Datasheet

More Installation Possibilities
Threaded channels and T-slots on the back of the LUMATRIS make it possible to
integrate or mount the luminaire in or onto the machine wall without additional
accessories. In order to individually optimize workroom installation, further options
are available:
- Mounting Frame*: Easier fl ush-mounting of the LUMATRIS in the machine wall
and to help prevent dirt and chip entrapment.
- Mounting Brackets*: Easier positioning of the LUMATRIS where access is
more diffi cult.
- Jointed Head*: Simple and precise positioning of the LUMATRIS for better il-
lumination at different angles.
* Accessories
More Connection Possibilities
The LUMATRIS is particularly easy to connect thanks to its M12 plug connector.
The connection is reverse-polarity protected so that a faulty terminal contact
does not result in negative consequences. The advantage of this plug connector
is that it is simple to replace the cable in the event of a defect.
It can be connected on the side or rear so that it does not get in the way of any
type of installation. Additional connection variations are available upon request,
for example, pre-assembled or for customer-side assembling, also with cable
protection system.
More Applications
With two different lengths, LUMATRIS introduces the advantages of modern
LED light technology to machines – even in large-volume workrooms.
The luminaire is optionally available with Light Forming Technology* instead of a
diffuser. In addition to glare-free properties and increased effi ciency, its narrower
light distribution facilitates a wide range of tasks.
The high-tech electronics are embedded in a housing with optimum heat man-
agement, making LUMATRIS suitable for higher ambient temperatures of up to
45 °C.
The IP68-1m & IPX9K system of protection allows it to be used in the toughest
conditions.
* selectable, see overview of variants
LUMATRIS.
SIMPLY MORE POSSIBILITIES.