Instruction manual

Quick Start Guide SECTION 3: WINDOWS VISTA (32-bit)

P/N 180273 Rev. L April 2013 USB Driver Installation for Windows Vista 32

Step 3

► You will see this message.

► Click on ‘Install this driver software anyway’

► You’ll get a message confirming the software

installation.

Step 4

► Next you’ll need to change the IP settings for the

LAN connections and right-click on the new one.

► It is labeled ‘Local Area Connection 2’ or similar.

► Right-click and choose ‘Properties’.

Step 5

► Choose ‘Internet Protocol Version 4’ and click

‘Properties’.

Step 7

► Open your browser and type in 199.199.199.2 to

access the WebMaster Login Screen

Step 6

► Check ‘Use the following IP address’ and type

199.199.199.1 for the IP address and 255.255.255.0

for subnet mask.

► Click ‘OK’ and you’re done!