Instruction manual

47
Menus that appear only if a 4-20mA option board is installed:
Corrosion
Other Inputs
4-20mA Inputs
Level Inputs
Menus that appear only if a digital input board is installed:
Posiflow Input
Interlock Input
Digital Inputs
Level Inputs
Menus that appear only if pH sensor input board is installed:
pH Input
pH Output
Menus that appear only if ORP sensor input board is installed:
ORP Input
ORP Output
Menu that appears only if one or more 4-20mA output boards are installed:
4-20mA Outputs
Menu that appears only if a software upgrade is available:
Software upgrade
6.2 Start up Menu
Select the option that you want for each of the sections on the page. When you click on the
“Submit” button at the bottom of the page, your changes will take effect. If you move to another
page without clicking “Submit” first, your changes will be lost!
Controller Name
Type the name that you want to use to identify the controller, up to 32 characters, in the text box.
For example, “XYZ Corp, North Tower”
Controller Time and Date
Update the date and time by clicking the arrow on the pull-down list and selecting the correct
values.
Controller Date Format
Click on the radio button that corresponds to the desired date format. The choices are
Month/Day/Year, Day/Month/Year or Year/Month/Day.
Bleed Relay Control Mode
Click on the radio button of the option that you want to use.
System Conductivity is the most commonly used bleed mode, where the bleed solenoid valve is
opened based on the system conductivity.