Instruction manual

Hand Time Limit xxxx

Use the arrow keys to change the maximum number of minutes that the ORP output can be

activated in the Hand mode. Any value between 0 and 1440 is acceptable. A value of 0 means the

output can be left on indefinitely. Press Enter to accept the new value.

5.7 Communication

This menu is used to enter the information required to communicate with the WebMaster using the

modem option via the Internet, or using the Ethernet option. Once this information is entered, a

remote PC may be used to configuring all or the set points that are unavailable with the keypad.

For Internet communications, it is also possible to do a manual test of the WebMaster’s ability to

use its modem to dial a local Internet Service Provider (ISP) and connect to the Internet.

The display will show a list of the various parameters. Use the Next key to move the cursor to the

line below the parameter. Use the Up and Down Arrow keys to change each character to the

correct number, letter, or symbol. Use the Left and Right Arrow keys to move the cursor to the

next character. Press Enter once all characters have been changed to the desired values.

Dial-up ISP Username

When the controller needs to dial out and connect to the Internet Service Provider,

it needs to identify itself with a user name, so that the ISP knows that it has an

account. Enter the user name here.

Dial-up ISP Password

Similarly, the controller needs to identify itself with a password in order to connect with the ISP.

Enter the password here.

Dial-up ISP Local Phone

Enter the phone number for the controllers Internet Service Provider. This will be the phone

number that it attempts to dial when getting on the Internet.

Controller Phone #

When you need to communicate with the controller, you go to the Walchem web site, link to the

Webmaster access page, and a call is made from our server to the controller to wake it up. Enter

the phone number for the controller, exactly as it needs to be dialed by our server in the USA. If

the WebMaster is installed within the USA or Canada, this may include the 1 prefix. If the

WebMaster is installed in another country, it must include the 011 prefix, country code, and phone

number.

When the cursor is on the pull down menu for the country code, use the UP or DOWN arrow keys

to scroll through the list of countries. The correct prfix (1 or 011) will be selected automatically.

Then press Next to move the cursor to the phone number and use the Arrow keys to change the

number. Press Enter to accept the changes.

Dial ISP

This menu is used to manually dial the WebMaster’s ISP. Press the Enter key when the cursor is

on this to start the process.

A new screen will appear. The first line will show the Dial up Status. This menu is informational

only, and tells you what is happening with the dialup connection. Possible status messages include: