Brochure

CALL [phone] · www.wal-rich.com · FAX [phone]
WAL-RICH CORPORATION • UNDERGROUND GAS PRODUCTS 2014
4
2891030 1” SDR11 x 3/4” SDR11
2891049 1 1/4” SDR10 x 3/4” SDR11
2891021 1 1/4” SDR10 x 1” SDR11
2891050 1 1/4” SDR11 x 3/4” SDR11
2891022 1 1/4” SDR11 x 1” SDR11
2891010 1 1/2” SDR11 x 3/4” SDR11
2891012 1 1/2” SDR11 x 1” SDR11
2891013 1 1/2” SDR11 x 1 1/4” SDR10
2891014 1 1/2” SDR11 x 1 1/4” SDR11
2891002 2” SDR11 x 3/4” SDR11
2891004 2” SDR11 x 1” SDR11
2891005 2” SDR11 x 1 1/4” SDR10
2891006 2” SDR11 x 1 1/4” SDR11
2891008 2” SDR11 x 1 1/2” SDR11
Con-Stab® Reducers
W-R IPS X IPS REDUCERS
W-R RUN BRANCH SDR
Always
Match
Pipe Size
& SDR
2890040 1/2” CTS x 3/4” SDR11
2890042 1/2” CTS x 1” SDR11
2890002 1” CTS x 3/4” SDR11
2890004 1” CTS x 1” SDR11
2890008 1 1/4” SDR-10 x SDR-11
W-R CTS X IPS REDUCERS
W-R THE SDR “MIRACLE” FITTING
2883070 1” SDR11 x 3/4” SDR11
2883061 1 1/4” SDR10 x 3/4” SDR11
2883063 1 1/4” SDR10 x 1” SDR11
2883062 1 1/4” SDR11 x 3/4” SDR11
2883064 1 1/4” SDR11 x 1” SDR11
2883080 1 1/2” SDR11 x 3/4” SDR11
2883082 1 1/2” SDR11 x 1” SDR11
2883083 1 1/2” SDR11 x 1 1/4” SDR10
2883084 1 1/2” SDR11 x 1 1/4” SDR11
2883050 2” SDR11 x 3/4” SDR11
2883052 2” SDR11 x 1” SDR11
2883053 2” SDR11 x 1 1/4” SDR10
2883054 2” SDR11 x 1 1/4” SDR11
2883056 2” SDR11 x 1 1/2” SDR11
Con-Stab® Reducing Tees
W-R MAIN OUTLET
Con-Stab® Saddle Tees
2893090 1 1/4” 3/4” SDR-11
2893092 1 1/4” 1” SDR-11
2896002 1 1/2” 3/4” SDR-11
2896006 1 1/2” 1” SDR-11
2894002 2” 3/4” SDR-11
2894004 2” 1” SDR-11
2894006 2” 1 1/4” SDR-11
2894502 3” 3/4” SDR-11
2894504 3” 1” SDR-11
2894506 3” 1 1/4” SDR-11
2894508 3” 2” SDR-11
Always
Match
Pipe Size
&
SDR
NEW SIZES!
NEW SIZES!
W-R Description Length
2887002 1/2” COP x 1/2” MIP 36”
2887004 1/2” COP x 1/2” MIP 84”
2887020 3/4” IPS x 3/4” MIP 36”
2887030 1” IPS x 1” MIP 36”
A
Step 1. Step 3.
“Con-Flex®” risers are flexible casings
that protect yellow PE pipe
aboveground. Con-flex® risers consist
of CSST flex hose, with a durable UV &
weather-resistant outer sleeve. Con-
forms to NFPA 54 & 58.
May be used with
Con-Stab® couplings.
CONFLEX® FLEX RISERS FOR
PROPANE
Instructions:
1. Disassemble the adapter coupling (B)
2. Feed the polyethylene pipe through the
sleeve from the moisture seal (A) to the
adapter coupling (B)
3. Assemble the adapter coupling by
sliding the gasket over the tubing, and then
pushing the tubing onto the insert. Tighten
the compression nut until it bottoms out.
B
- Free promotional materials
- One-on-One sales training
- Sizing/Technical assistance
- Information about online
training & certification
Call us today for: