Manualshelf

Submittal Sheet

ManualsBrandsWal-rich ManualsCon-Stab Gas Fittings1-1/4" (Main) 3/4" (Outlet) Con-Stab Saddle Tee (SDR-11)
1
WAL-RICH CORPORATION • SPECIFICATION PAGE
CALL (800) 221-1157 · www.wal-rich.com · FAX (516) 277-2177
Con-Stab® Saddle Tees
Job Name: ____________________________________________
Job Location: ____________________________________________
Contractor: ____________________________________________
Engineer: ____________________________________________
Approval: ____________________________________________
WR# Main Outlet SDR H L1 OAL W Weight
Design Features:
- Continental’s patented “ID Seal”
- For underground PE pipe (ASTM D 2513) only
- 316 Stainless Steel Bolts, Washers & Inserts
- “Coupon-Retaining” Punch
- Made in USA
Operating Specifications:
Temperature: -20° to 140° F
Pressure: 125 psi
Continental Industries is an ISO 9001 Certified Company.
NFPA 58, LP-Gas Code NFPA 54, National Fuel Gas Code
ICC – International Plumbing Code IAPMO – Uniform Plumbing Code
Approved by the Commonwealth of Massachusetts
D.O.T., Title 49 of the Code of Federal Regulations, Part 192.283 (b)
ASME B31.8-1995 “Gas Transmission and Distribution Piping Systems”
ASTM D 2513 “Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing and Fittings”
2893090 1-1/4” 3/4” SDR-11 4-13/16” 6-1/2” 8-1/16” 4” 1.20 lbs. 2888014
2893092 1-1/4” 1” SDR-11 4-13/16” 6-1/2” 8-1/16” 4” 1.29 lbs. 2888016
2896002 1-1/2” 3/4” SDR-11 5-7/8” 6-3/8” 8-1/2” 4” 1.67 lbs. 2888014
2896006 1-1/2” 1” SDR-11 5-7/8” 6-3/8” 8-1/2” 4” 1.75 lbs. 2888016
2894002 2” 3/4” SDR-11 5-5/8” 6-3/16” 8-1/4” 4” 1.44 lbs. 2888014
2894004 2” 1” SDR-11 5-5/8” 6-3/16” 8-1/4” 4” 1.53 lbs. 2888016
2894006 2” 1-1/4” SDR-11 8-1/2” 9-5/8” 11-7/8” 6” 1.53 lbs. 2888007
2894502 3” 3/4” SDR-11 7-3/16” 6-11/16” 9-1/4” 3-7/16” 1.52 lbs. 2888014
2894504 3” 1” SDR-11 7-3/16” 6-11/16” 9-1/4” 3-7/16” 1.61 lbs. 2888016
2894506 3” 1-1/4” SDR-11 9-5/8” 9-9/16” 12-7/16” 5-3/4” 1.20 lbs. 2888007
2894508 3” 2” SDR-11 9-5/8” 9-9/16” 12-7/16” 5-3/4” 1.29 lbs. 2888010
Continental’s “ID Seal”
(O-
OAL
W
H
L1
Required
Chamfer Tool
You must use a
Continental Chamfer Tool
on a Continental Fitting
Always
Match
Pipe Size
& SDR

Summary of content (1 pages)