Submittal Sheet

WAL-RICH CORPORATION • SPECIFICATION PAGE
CALL [phone] · www.wal-rich.com · FAX [phone]
Con-Stab® Anodeless Gas Meter Risers
Job Name: ____________________________________________
Job Location: ____________________________________________
Contractor: ____________________________________________
Engineer: ____________________________________________
Approval: ____________________________________________
WR# Size Wall Vertical Horizontal Weight Required
Continental Industries is an ISO 9001 Certified Company.
NFPA 58, LP-Gas Code NFPA 54, National Fuel Gas Code
ICC – International Plumbing Code IAPMO – Uniform Plumbing Code
Approved by the Commonwealth of Massachusetts
D.O.T., Title 49 of the Code of Federal Regulations, Part 192.283 (b)
ASME B31.8-1995 “Gas Transmission and Distribution Piping Systems”
ASTM D 2513 “Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing and Fittings”
2886036 1/2” CTS .090 Wall 30” 12” 3 2888020
2886004 3/4” IPS SDR-11 30” 29” 5 2888014
2886008 1” IPS SDR-11 30” 28” 6 2888016
2886040 1” CTS .099/.101 Wall 30” 27” 6 2888022
2886012 1-1/4” IPS SDR-10 32” 34” 10 2888006
2886013 1-1/4” IPS SDR-11 32” 34” 10 2888007
2886016 1-1/2” IPS SDR-11 32” 34” 16 2888008
2886020 2” IPS SDR-11 36” 34” 22 2888010
Thickness Length Length (lbs.) Chamfer Tool
You must use a
Continental Chamfer Tool
on a Continental Fitting
Always
Match
Pipe Size
& SDR
MIP
Medium density yellow
polyethylene PE2406
Continental’s “ID Seal”
Anodeless Design
Plastic Pipe runs
inside the riser.
Corrosion-resistant fusion-
bonded epoxy coating
Design Features:
- Anodeless design
- For underground PE pipe (ASTM D 2513) only
- Continental’s patented “ID Seal”
- Corrosion-Resistant fusion-bonded epoxy coating
- Yellow Medium Density polyethylene - PE2406
- Made in the USA
Operating Specifications:
Temperature: -20° to 140° F
Pressure: 125 psi