Product Overview

WAL-RICH CORPORATION • SPECIFICATION PAGE
CALL [phone] · www.wal-rich.com · FAX [phone]
Poly-End Anodeless Gas Meter Risers
Job Name: ____________________________________________
Job Location: ____________________________________________
Contractor: ____________________________________________
Engineer: ____________________________________________
Approval: ____________________________________________
WR# Size Wall Dimentions Weight Required
NFPA 58, LP-Gas Code NFPA 54, National Fuel Gas Code
ICC – International Plumbing Code IAPMO – Uniform Plumbing Code
Approved by the Commonwealth of Massachusetts
D.O.T., Title 49 of the Code of Federal Regulations, Part 192.283 (b)
ASME B31.8-1995 “Gas Transmission and Distribution Piping Systems”
ASTM D 2513 “Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing and Fittings”
2886002 3/4” IPS SDR-11 30” 16” 10” 4.50 2888014
2886006 1” IPS SDR-11 30” 16” 10” 5.95 2888016
2886030 1” CTS .099/.101 Wall 30” 16 10” 8.20 2888022
2886010 1-1/4” IPS SDR-10 36” 22” 10” 8.90 2888006
2886011 1-1/4” IPS SDR-11 36” 22” 10” 8.85 2888007
2886014 1-1/2” IPS SDR-11 36” 26” 10” 14.20 2888008
2886018 2” IPS SDR-11 36” 30” 10” 21.25 2888010
Thickness V H PE (lbs.) Chamfer Tool
Medium density yellow
polyethylene PE2406
Anodeless Design
Plastic Pipe runs
inside the riser.
Corrosion-resistant fusion-
bonded epoxy coating
H
PE
V
Design Features:
- Anodeless design
- For underground PE pipe (ASTM D 2513) only
- Corrosion-Resistant fusion-bonded epoxy coating
- Yellow Medium Density polyethylene - PE2406
- Plain PE end can be used with compression fittings,
“stab” fittings, & fusion.
- Made in USA
Opperating Specifications:
Temperature: -20 to 140° F
Pressure: 100 psi
MIP
You must use a
Continental Chamfer Tool
on a Continental Fitting
Always
Match
Pipe Size
& SDR