Submittal Sheet

WAL-RICH CORPORATION • SPECIFICATION PAGE
CALL [phone] · www.wal-rich.com · FAX [phone]
Con-Stab® Tees
Job Name: ____________________________________________
Job Location: ____________________________________________
Contractor: ____________________________________________
Engineer: ____________________________________________
Approval: ____________________________________________
WR# Size Wall Overall Weight Required
Design Features:
- Continental’s patented “ID Seal”
- For underground PE pipe (ASTM D 2513) only
- Made in USA
Operating Specifications:
Temperature: -20° to 140° F
Pressure: 125 psi
Continental Industries is an ISO 9001 Certified Company.
NFPA 58, LP-Gas Code NFPA 54, National Fuel Gas Code
ICC – International Plumbing Code IAPMO – Uniform Plumbing Code
Approved by the Commonwealth of Massachusetts
D.O.T., Title 49 of the Code of Federal Regulations, Part 192.283 (b)
ASME B31.8-1995 “Gas Transmission and Distribution Piping Systems”
ASTM D 2513 “Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing and Fittings”
2883000 1/2” CTS .090 Wall 5-1/2” 2-15/16” 0.6 2888020
2883002 3/4” IPS SDR-11 6” 3-1/16” 1.0 2888014
2883004 1” IPS SDR-11 6-1/4” 3-1/4” 1.5 2888016
2883020 1” CTS .099/.101 Wall 6” 3-1/16” 1.3 2888022
2883006 1-1/4” IPS SDR-10 17-1/2” 8-13/16” 3.0 2888006
2883007 1-1/4” IPS SDR-11 17-1/2” 8-13/16” 3.0 2888007
2883008 1-1/2” IPS SDR-11 17-3/8” 8-3/4” 4.6 2888008
2883010 2” IPS SDR-11 18-3/4” 9-3/8” 5.5 2888010
Thickness Length Height (lbs.) Chamfer Tool
Overall Length
Height
You must use a
Continental Chamfer Tool
on a Continental Fitting
Always
Match
Pipe Size
& SDR