Instruction Booklet
10
STRAIGHTENER
WIRING
WARNING: If the supply cord is damaged it must be replaced by
the manufacturer or a suitably qualied professional in order to
avoid a hazard.
The wires in the mains lead of this Straightener are coloured in
accordance to the following code:
Blue Neutral (N) Brown Live (L)
This appliance is tted with a 3 pin BS Approved BS1363 plug which
has a 13amp fuse tted. If the plug supplied is not suitable for your
socket or becomes damaged, it should be cut o and disposed of, and
a suitable plug tted as detailed below.
As the colours of the wires in the mains lead of this Straightener may
not correspond with the colour markings identifying the terminals in your
plug, proceed as follows:
The wire, which is coloured BLUE, must be connected to the terminal in
the plug which is marked with the letter ‘N’ or coloured BLACK or BLUE.
The wire, which is coloured BROWN, must be connected to the
terminal in the plug which is marked with the letter ‘L’ or coloured RED
or BROWN.
DO NOT connect either wire to the terminal in the plug which is marked
with the letter E, has the Earth symbol, or coloured GREEN or GREEN
AND YELLOW.