Instruction Booklet
15
ULTIMA PLUS SHAVER
3.Grasp the old cutting blades at both ends between thumb and
index nger and pull them carefully off the shaver.
4.Take the new cutting blades at both ends between thumb
and index nger and push them into the white holding device.
Press the cutting blades completely and briey down once
until they audibly lock into place.
5.Pull the shaving foil frame out off the bracket on the blade
head frame.
6.Place the new shaving foil frame into the blade head frame.
When inserting the shaving foil frame, make sure the bracket
of the shaving foil frame points to the front of the blade head
frame. Carefully press onto the shaving foil frame until it
snaps into place with an audible click.
7.Replace the blade head onto the shaver.
TROUBLESHOOTING
WARNING!
• Do not attempt to repair the shaver yourself.
• Always remove the charger from the socket whenever a fault
occurs.
If you are experiencing a fault which is not listed here, please
do not hesitate to contact our Customer Services. Repairs must
only be carried out by qualied technicians or by our Service
Centre.
Fault
Please check the following
No function •Is there power to the power point?
•Batteries low?
The shaving
performance
diminishes:
•Cutting blade cleaned and oiled?