Lithium Ion Trimmer Lithium Ion Trimmer Instructions 1
Lithium Ion Trimmer Please read all instructions carefully to familiarise yourself with your new Wahl trimmer before using. Save these instructions for further reference. For any further assistance or information call Customer Services on T: 01227 740066 or visit W: www.wahl.co.uk E: customer.services@wahl.co.
Lithium Ion Trimmer Please retain this leaflet for future reference. READ ALL INSTRUCTIONS BEFORE USING. IMPORTANT SAFEGUARDS When using your electrical appliance, basic safety precautions should always be followed, including the following: 1.
Lithium Ion Trimmer outlet immediately after using. 4. Do not operate the appliance with a broken cord, plug or charger, or if the appliance malfunctions, or is dropped or damaged in anyway. 5. Do not wrap the cord around the appliance. 6. Any servicing or repair must be performed by an authorised service representative. 7. Do not use outdoors or in damp areas. 8. The use of attachments that are not supplied by the manufacturer may cause fire, electric shock or injury and damage to the appliance. 9.
Lithium Ion Trimmer 13. Exhausted batteries/rechargeable batteries should not be disposed of in the household waste. Dispose of them in a completely discharged state in accordance with local legal regulations. Do not throw into fire where heat could cause them to rupture. Danger of explosion ►►Never use the appliance where aerosol (spray) products are being used or where oxygen is released. WARNING: KEEP THE APPLIANCE DRY OPERATING INSTRUCTIONS RECHARGING 1.
Lithium Ion Trimmer TROUBLESHOOTING If your Trimmer does not seem to take a charge, check the following before returning it for repair: 1. Check outlet to make sure it is working by plugging in another appliance. 2. Make sure the outlet simply is not connected to a light switch which turns the power at the outlet off when lights are turned off. 3. Be sure the trimmer is properly connected to the recharging transformer, all connections are secure and the switch on the trimmer is turned “OFF - 0.” 4.
Lithium Ion Trimmer damp cloth to wipe down the body of the trimmer, taking care not to get the blades wet. Store unit in such a manner so that blades are protected from damage. When the trimmer is not in use, the trimmer guide/blade guard attachment should be in place to protect the blades. This appliance should be stored in a manner where it is not subjected to Crushing, Heating above 100°C (212°F), or Incineration.
Lithium Ion Trimmer of a base and a comb. It should not be disassembled. To attach the guide, simply slide it on at a slight angle and press the release tab down to secure in position. To remove the guide, gently push up on the release tab and slide the assembly away from the trimmer. Adjust the trimming length by pressing on the thumb lever and moving the comb forward or backward to the desired setting.
Lithium Ion Trimmer 2. 3. 4. 5. 6. may be longer than the others. Attach the 6-position trimming guide to trim and taper your beard. Begin with the guide set at a long trimming length. Trim toward your chin in smooth, overlapping strokes, following the lay of your beard. If you trim against the way your beard naturally lays, the trimmer will cut the hair much shorter than the marked length. Adjust the trimming guide to progressively shorter settings until you reach the desired length of beard.
Lithium Ion Trimmer DETAILING NECKLINES, SIDEBURNS, MUSTACHES & BEARDS using trimmer head. Slowly move trimmer downward on desired areas to neatly trim and shape. TRIMMING ARM & LEG HAIR using trimmer head. Simply glide the trimmer over your arm or leg until desired hair length is achieved. The first time you trim the hair, start by using a longer setting on the guide comb on the trimmer, then use progressively shorter settings if a shorter length is preferred.
Lithium Ion Trimmer TRIMMING PRIVATE AREAS with the trimmer & detailer head. 1. Volume reduction using trimmer head. Attach guide comb and select a long trimming length. Begin trimming, starting at the top and working down. Use progressively closer settings to get the “look” and length you prefer. 2. For hard to reach or tight areas, use the detailer head. Always pull skin taut. Then slowly move the detailer through area to trim until desired look is accomplished. 3.
Lithium Ion Trimmer 2. For the top of the head, cut with the grain using the individual guide comb attachments. The smaller the number of the comb, the shorter the cut. Comb or brush the hair as you cut for an even end result. 3. To complete the fade, blend the hair at the fade line by trimming up and out across the line and against the grain all the way around the head. Then, repeat all around, turning the trimmer upside down and cutting downward.
Lithium Ion Trimmer WIRING WARNING: IF THE TRANSFORMER IS DAMAGED IT MUST BE REPLACED IN ORDER TO AVOID A HAZARD. THIS PRODUCT MUST ONLY BE USED WITH THE TRANSFORMER SUPPLIED. SHOULD A REPLACEMENT BE REQUIRED CONTACT WAHL CUSTOMER SERVICES. WASTE ELECTRICAL & ELECTRONIC EQUIPMENT DIRECTIVE 2002/96/EC (WEEE) At the end of this products life it should not be disposed of with general household waste. Care should be taken to dispose of in a suitable manner in accordance with your Local Authority regulation.
Lithium Ion Trimmer GUARANTEE This product is guaranteed against defects in material and workmanship for a period of 5 years from the date of original purchase or receipt as a gift. Should this product become defective during the guarantee period, return it to the store of purchase together with your proof of purchase for repair or replacement.
Lithium Ion Trimmer 15
Lithium Ion Trimmer WAHL (UK) LTD STERLING HOUSE CLIPPER CLOSE RAMSGATE, KENT CT12 5GG CUSTOMER SERVICES T: 01227 740066 www.wahl.co.uk Form No.
