VACUUM TRIMMER VACUUM TRIMMER INSTRUCTIONS 1
VACUUM TRIMMER Please read all instructions carefully to familiarise yourself with your new Vacuum Trimmer before using. Save these instructions for further reference. For any further assistance or information call Customer Services on T: 01227 740066 or visit W: www.wahl.co.uk E: customer.services@wahl.co.
VACUUM TRIMMER GENERAL USER INFORMATION Information about using the operation manual ►►Before using the appliance for the first time, you must read and understand the operation manual completely. ►►Consider the operation manual as part of the product and store it in a safe and accessible place. ►►Include this operation manual if passing the appliance on to a third party. ►►In the case of conflicts with national safety specifications or instructions, the national requirements must be followed.
VACUUM TRIMMER Please retain this leaflet for future reference. READ ALL INSTRUCTIONS BEFORE USING. IMPORTANT SAFEGUARDS When using this electrical appliance, especially when children are present, basic safety precautions should always be observed including the following. Requirements ►►Read the instruction manual in full to familiarize yourself with the product before the first use.
VACUUM TRIMMER Hazards Danger! Electric shock due to damage to appliance ►►Do not operate the appliance with a broken cord, plug or charger, or if the appliance malfunctions, or is dropped or damaged in anyway. ►►Any servicing or repair must be performed by an authorized service representative. ►►The use of attachments that are not supplied by the manufacturer may cause fire, electric shock or injury and damage to the appliance. Danger! Electric shock due to penetration of liquid.
VACUUM TRIMMER ►►Exhausted batteries/ rechargeable batteries should not be disposed of in the household waste. Dispose of them in a completely discharged state in accordance with local legal regulations. Do not throw into fire where heat could cause them to rupture. Warning! Injuries due to incorrect handling ►►Switch off the appliance and unplug from outlet when not in use, before putting on or taking off attachments and also before cleaning the appliance.
VACUUM TRIMMER Hair Intake Collection Chamber/ Hair Chute Exhaust Vents On/Off Switch Charging Light OPERATING INSTRUCTIONS RECHARGING The trimmer cannot be overcharged, so you may charge it as often as desired. However, periodic recharging of the trimmer, rather than continuous recharging, will prolong battery life. Run time may vary depending on coarseness of beard and attachment head used. Charge when trimmer seems to lose power or run slower. The charging LED will pulse while charging.
VACUUM TRIMMER 6. 7. 8. is available when it is next used. This transformer is designed to completely charge the battery without overcharging. The battery will take approximately 90 minutes to charge. The Lithium Ion Trimmer also has quick charge capability. Insert only recharging transformer plug supplied by the manufacturer into charger receptacle. This is a rechargeable cord/cordless trimmer, it can be used with the cord so you can trim even if the charge is low.
VACUUM TRIMMER B C D A 6-POSITION TRIMMING GUIDE COMB makes achieving a consistent trim easy every time. (SEE B) The guide comb can be removed (providing a seventh cutting position) and reattached without changing the preset cutting length, so once you have found the perfect length, there’s no guesswork in achieving it with every trim. The guide comb is a two-piece assembly, consisting of a base and a comb. It should not be disassembled.
VACUUM TRIMMER PRO TIPS 1. Hair cuts best with an electric trimmer/shaver when it is clean and dry. For best results, do not use with wet or damp hair. 2. It can take up to 30 days of regular use to train your hair to a new shaving system. Some irritation may occur during this time. Stick with it. Your hair and skin will adjust, and you will get a great shave. USING GUIDE COMBS To attach guide combs, hold comb with the teeth up. Snap guide comb attachment firmly to the bottom of the trimmer blade.
VACUUM TRIMMER G 3. 4. 5. under the chin, changing to a longer guide toward the front of the face and point of your chin. To cut the outline of your beard, remove the trimming guide. Starting under your chin and working back toward your jawbone and ears, cut the outer perimeter of your beard underneath the jawbone. Continue the line all the way up to the ears and hairline. (SEE G) Accentuate your beard line by using the trimmer in a downward motion.
VACUUM TRIMMER LITHIUM-ION BATTERY REPLACEMENT This product uses a lithium-ion battery. For proper disposal of this appliance, please refer to disposal section on page 14. For battery replacement send the entire, intact clipper unit to Wahl (UK) Limited. Do not attempt to remove the battery. Lithium-Ion batteries can explode, catch fire, and/or cause burns if disassembled, damaged, or exposed to water or high temperatures.
VACUUM TRIMMER DO NOT USE SOLVENTS OR ABRASIVES! For best results, put 5 drops of WAHL Clipper Oil on the blades only when necessary, or approximately once a month. Motor bearings are permanently lubricated—do not attempt to oil. DO NOT OVER OIL! Excessive oiling or application of liquids will cause damage if allowed to seep back into motor. CLEANING/STORAGE To Clean Hair Collection Chamber: Holding the unit upright, press thumb firmly on the bottom of the chamber and slide the collection chamber out.
VACUUM TRIMMER WIRING WARNING: IF THE TRANSFORMER IS DAMAGED IT MUST BE REPLACED BY THE MANUFACTURERS SERVICE AGENT OR A SIMILARLY QUALIFIED PERSON IN ORDER TO AVOID A HAZARD. THIS PRODUCT MUST ONLY BE USED WITH THE TRANSFORMER SUPPLIED. SHOULD A REPLACEMENT BE REQUIRED PLEASE CONTACT WAHL CUSTOMER SERVICES. DISPOSAL Handle with care! Environmental damage in the case of incorrect disposal.
VACUUM TRIMMER GUARANTEE This product is guaranteed against defects in material and workmanship for a period of five years from the date of original purchase or receipt as a gift. Should this product become defective during the guarantee period, return it to the store of purchase together with your proof of purchase for repair or replacement.
► ►WAHL (UK) LTD VACUUM TRIMMER ►►Sterling House WAHL (UK) Close LTD ► ►Clipper STERLING HOUSE ► ►Ramsgate, Kent ► ►CT12 5GG CLIPPER CLOSE ► ► RAMSGATE, KENT ► ►CUSTOMER SERVICES T: 01227 CT12 5GG 740066 ► ►www.wahl.co.uk CUSTOMER SERVICES T: 01227 740066 www.wahl.co.uk Form No. ZB868 Rev.
