Instruction Booklet

Chromium Multi Groomer

screwdriver into the gap and prize apart.

5. Cut or break the wire stamps on both ends of the battery

and remove the battery

6. Apply tape to both ends of the battery before recycling/

disposing.

OILING CLIPPER BLADES

The blades of your new clipper should be oiled after every

haircut. Simply place a few drops of Wahl Clipper Oil on the

blades at points A and B. Switch the clipper on briey (approx

10 seconds) to ensure the oil lm is evenly distributed. Use

only the Wahl Clipper Oil included in the pack. Due to the high

speed of your Wahl Clipper, the correct type of oil must be

used. Do not use hair oil, grease or any oil mixed with kerosene

or any solvent, as the solvent will evaporate and leave the thick

oil, slowing down the blades. Wahl Clipper Oil is a very thin,

natural oil which will not evaporate and will not slow down the

blades.

IMPORTANT: Do not over Oil.

BLADE CARE

Trimmer blades have precision-hardened, ground and lapped

cutting teeth. Blades should be handled carefully and never

bumped or used the cut dirty abrasive material. Should blades

become dull or damaged, you may purchase a new blade

assembly from Wahl. Be sure to ask for the Groomsman Blade

Assembly.