User Manual

Size: W 0.00” X H 0.00"
Job #: WAHL 117240
File Name: 117240_Clip_SiteRefresh_V3.ai
Printout Size
100%
Updates: je053107 JB 5.5.07, sh061407,mkl061807,
bh62507,aj062807,BBhrr6.29.07
This printout is for indicating
color breaks only.
Do not use for color matching.
Do not measure for accuracy.
Revision: 04
Time: 1245pm
Printing & Finishing: None- PDF File ONLY
Colors: RGBWEB
Home Haircutting With
Home Haircutting
in 4 Easy Steps
1. Cutting
2. Blending
3. Tapering
4. Finishing Touches
Join the millions of satisfied Wahl home clipper users.
With 99% customer satisfaction, Wahl clippers make
“Keeping it clean” a cinch.
For personal attention from one of our
customer service representatives,
please contact us at
www.wahl.com
1.800.334.4627
Guide Comb Listing
ATTACHING GUIDE COMBS
Align comb onto blade, then...
Press tab until you hear a snap.
NOTE:
1) Always start with the largest guide comb, then use shorter combs if a shorter length is desired.
2) Cut only a small amount until you become accustomed to how long each guide comb leaves the hair.
3) Cut slowly and smoothly. Do not force the clipper through the hair.
Some kits do not include all Wahl guide combs. Some kits include colored guide combs for
ease in remembering which combs were previously used.
Black
Light
Green
#1/2
(1.5mm)
1/16"
#1
(3mm)
1/8"
#1-1/2
(3mm)
1/8"
#2
(6mm)
1/4"
#3
(10mm)
3/8"
#4
(13mm)
1/2"
#5
(16mm)
5/8"
#6
(19mm)
3/4"
#7
(22mm)
7/8"
#8
(25mm)
1"
#12
(38mm)
1-1/2"
#10
(32mm)
1-1/4"
Black
Red
Black
Burgundy
Black
Purple
Black
Dark Blue
Black
Orange
Black
Yellow
Black
Lavender
Black
Green
Black
Light Blue
White Only
Black Only
1
2
2
1
Get ready for cutting by
combing hair. Then attach
the largest guide comb
and make sure the taper
level is in the up position.
Begin cutting at the hairline.
Using upward strokes, cut
towards the middle of the
head. NOTE: If hair is longer
than wanted, repeat this
step with one size smaller
guide comb.
Continue around the
head using upward
strokes.
Now you’re ready to cut
the middle section of hair.
Pick a guide comb one
number higher than what
you used for cutting the
hairline.
Using upward strokes, cut
the middle section around
the head.
Comb out hair to see if you
need to do any extra cutting.
Pick a guide comb one
number higher than what
you used for cutting the
middle portion of the hair.
Begin cutting from the
front.
Using long strokes, cut
across top of head.
Smoothing lines formed
from cutting is easy. Use
the same guide comb from
cutting the hairline with
taper level in down position.
Use a rocking motion to
blend out middle cutline.
Use the same guide comb
from cutting top of head
and blend top cutline.
Ear guide combs have a
taper built right in. Length
ranges from 1/8" to 1/2".
Attach left ear guide comb
to your clipper. Put taper
level in down position.
Hold top of the ear down.
Hold clipper at a slight
angle. You will begin
cutting just behind ear
at the hairline.
Cut around the ear in an
upward and then outward
motion.
1
Finishing Touches
Cutting Hair
... Getting Started
You don’t need any
attachments. Just close cut
position by pushing the
taper lever up.
Start by cleaning up
sideburns.
Continue around each ear
as shown.
Clean up the neckline
as shown.
Put brown trim guide on
your clipper.
Begin just above your nose
and slowly trim towards the
outside of your face.
NOTE: Get a closer brow trim by
working from the outside of
your face to your nose.
Put ear trim guide on
your clipper.
Hold your clipper at about
45-degree angle. Trim slowly,
moving the clipper from
back to front.
4
Necklines and Sideburns
Around Ears
Eyebrows
For personal attention from one of our
customer service representatives,
please contact us at
www.wahl.com
1.800.334.4627
1
st
Time
Cutting Hair
The first time you cut hair,
cut only a small amount of
hair until you become
accustomed to the length
of hair each guide comb
provides. (See guide comb
listing on page 4.)
• Start by attaching the
largest guide comb on
the clipper.
• Then use shorter guide
combs if a shorter length
is desired.
• For uniform cutting, cut
at a slow, even speed.
Get how-to videos, downloadable
instructions and more at
www.wahlkeepitclean.com
1
st
Time Cutting Hair
The first time you cut hair, cut only a small
amount of hair until you become accustomed to
the length of hair each guide comb provides.
(See guide comb listing on page 4.)
• Start by attaching the largest guide comb
on the clipper.
• Then use shorter guide combs if a shorter
length is desired.
• For uniform cutting, cut at a slow, even speed.
Get how-to videos, downloadable instructions and more
at www.wahlkeepitclean.com
1
Cutting
2
Blending
3
Tapering
Clip ‘n Trim
®
Deluxe
Chrome Pro
®
Color Pro
™