Instruction Booklet

18
MAINS CLIPPER
The wires in the mains lead are coloured in accordance to the
following code:
Blue Neutral (N) Brown live (L)
This lead is tted with a 3 pin plug which has a 3 amp fuse tted.
If the plug supplied is not suitable for your socket or becomes
damaged, it should be cut o󰀨 and disposed of, and a suitable plug
tted as detailed below.
The wire which is coloured BLUE must be connected to the terminal
in the plug which is marked with the letter ‘N’ or coloured BLACK or
BLUE.
The wire which is coloured BROWN must be connected to the
terminal in the plug which is marked with the letter ‘L’ or coloured
RED or BROWN.
DO NOT connect either wire to the terminal in the plug which is
marked with the letter ‘E’ or has the Earth symbol, or coloured
GREEN or GREEN/YELLOW.
This lead has been specically designed for use with Wahl mains
powered clippers and should not be used with any other product.
Wahl (UK ) Ltd. accept no responsibility for any accidental injury or
damage resulting from the incorrect tting of this product.