Instruction Booklet

12
MAINS CLIPPER
f Remove the attachment comb (Fig. 5 b ) after every use. Remove the
hair clippings from the blade set with the cleaning brush.
f If a thorough cleaning is required, the blade set can be
removed. See chapter
Changing the blade set.
f After cleaning the blade set, we recommend using Wahl hygienic spray.
It keeps all blade sets hygienically clean and is effective against
bacteria and viruses.
f Oil the blade set with the blade set oil (Fig. 6).
f We recommend that you clean and care for your blade set during and
after clipping. Oiling and cleaning of the blade set protects against
corrosion and helps the blade to last longer.
f Switch the appliance on briefly (approx. 10 seconds) to ensure the oil
film is evenly distributed.
f For a good and long-lasting cutting performance, it is important
to oil the blade set frequently
f If the cutting performance deteriorates after long use despite
regular cleaning and oiling, the blade set should be replaced.
f Only wipe the appliance with a soft, slightly damp cloth.
Problem elimination
Blade set is cutting badly.
Blade set is pulling hair out.
Cause: Blade set is dirty.
f Clean and oil the blade set (Fig. 6).
Cause: Blade set is worn out.
f Replace the blade set (Fig. 7/8/9).
Skin injury
Cause: Too much pressure on the skin.
f Less pressure on the skin.
Cause: Cutting angle is too high.
f Hold appliance more flatly to the skin.