Instruction Booklet

15
SHAVER
TO REMOVE CUTTER BAR
Turn shaver o󰀨. Remove the foil
head and, holding the shaver in
one hand, gently pull up on cutter
bar. Be sure your thumb and rst
nger are positioned at each end of
the cutter bar.
WARNING: Handle cutting
components with care to avoid
personal injury.
NOTE: If you do not hold the
cutter bar as shown, brushing the
blades could result in damage to
the assembly.
When the foil head and cutter bars
are removed from the shaver, an
alternate cleaning method is to rinse
them under running water. Simply let
them air dry. After cleaning, replace
the cutter bars by pressing down
gently. Carefully replace the foil head,
snapping it into place.
From time to time, depending on the density of your beard,
you will need to replace the cutters and foils. If you notice
that it is taking you longer to shave, or if your face starts to
feel some irritation, or if the foil seems to become warm to
the touch, it is probably time to replace the cutters and foils.
Replace the cutters and foils only with WAHL parts. Please
contact Wahl customer services for replacement.