Instruction Booklet
10
FLEX CORDLESS MASSAGER
BEFORE USE
Remove all packaging and familiarise yourself with your
massager and attachments as listed in description of
parts on pages 8 and 9.
Charge your massager before use, see below.
RECHARGING
1. This massager is designed for household use. It
should be allowed to charge for 19 hours before rst
use.
2. Connect the transformer to the massager. BE
SURE MASSAGER IS IN THE “OFF - 0” POSITION
WHEN CHARGING.
3. Plug the recharging transformer into any convenient
electrical outlet at the correct voltage.
4. Ni-MH battery life may be extended with the
following procedure: Once every month, let the
massager run until the motor stops. Move the
switch to the “OFF - 0” position and recharge for 19
hours.
5. The massager will run for approximately 120
minutes on a single charge.
OPERATING INSTRUCTIONS
1. After allowing to fully charge, place the desired
massage attachment on the stem of the massager.
The attachments easily press on and pull o.
2. Slide the switch to the “ON - I” position.
3. Apply the massager to the targeted area, using
continual movement. A circular motion is often most
eective. (See MASSAGE TECHNIQUES.)