Instruction manual

39
TP298
We recommend the following cleaning intervals.
Thermal transfer print – marking strips 2009-110:
to be cleaned after 50 to 70 m printing; if a deterioration of the print image is observed earlier,
cleaning should be commenced immediately.
Thermal transfer print – WMB Inline 2009-115:
after each printed spool
Thermal transfer print – label printing:
cleaning after each transfer foil roll change
1. Disconnect the device from the power supply
2. Turn the print head away.
3. Remove the labels and transfer foil from the printer
4. Clean the print head surface
• Do not use sharp or hard objects when cleaning the print head!
• Do not touch the protective glass layer of the print head with bare
hands.
• Clean the print head as follows: