Instruction manual

TP298

4. Scope of delivery

Please verify the printer condition immediately after its arrival to determine any possible transport

damages.

ATTENTION!

Please keep the original transport packaging for possible future transports.

The standard scope of delivery comprises:

Thermal transfer printer TP298

Power cable

3m USB cable and 3m RS-232 interface cable

2 empty foil cores 100 mm

2 empty foil cores 35 mm

Operating instructions

WAGO ProServe CD

Registration form

REMOVAL OF TRANSPORT BLOCKS

 Lift label printer by its retaining loops from the box.

 Inspect the printer for transport damages.

 Position the printer on a level surface.

 Open the cover.  (1)

 Remove the transport block (foam pads) above and below the print head. Turn the side print

head lever to remove the foam pads more easily.  (2)

Please retain the foam pads

together with the original

packaging, because, in case

of future transports, the print

head should be secured as

described above.