Datasheet

Data sheet | Item number:890-252
www.wago.com/890-252
12.12.2018Page /2 5
Connection data
Connection technology
Push-in CAGE CLAMP
®
Actuation type Operating tool
Push-in
Nominal cross section 1.5 mm²
Solid conductor 0.25 … 1.5 mm² / 22 … 16 AWG
Solid conductor, push-in termination 0.75 … 1.5 mm² / 20 … 16 AWG
Stranded conductor 0.25 … 1 mm² / 22 … 18 AWG
Fine-stranded conductor 0.25 … 1.5 mm² / 22 … 16 AWG
Fine-stranded conductor with ferrule with plastic collar 0.25 … 0.75 mm² / 22 … 20 AWG
Fine-stranded conductor with ferrule without plastic collar 0.25 … 0.75 mm² / 22 … 20 AWG
Fine-stranded conductor with ferrule, push-in termination, from 0.75 mm² / 20 AWG
Strip length 9 mm / 0.35 Inch
Note (strip length) see also packaging or instructions
No. of poles 2
Total number of connection points 2
Total number of potentials 2
Conductor entry direction to mating direction 0 °
Geometrical Data
Pin spacing 4.4mm (0.173inch)
Width 10.4 mm / 0.409 inch
Height 11.7 mm / 0.461 inch
Depth 34.1 mm / 1.343 inch
Mechanical data
Coding B
Mating force of a plug-in connection approx. 20 … 70 N (depending on pole number)
Retention force of a plug-in connection when locked: > 80N
Unmating force of a plug-in connection when unlocked: approx. 20 … 70 N (depending on pole number)
Marking 1 2
Degree of protection IP20
Potential marking 1 2
Plug connection
Contact type (pluggable connector) Male connector/plug
Connector connection type for conductors
Locking of plug-in connection locking lever
Locking lever no
Material Data