Datasheet

3
254
Out
In
max.
min.
Out
In
max.
min.
857-809
Operating push/slide switch:
The following switching thresholds (SP1 and SP2) are set via
push/slide switch. The switch is located under the front-side
transparent cover and can be operated manually.
- Press PSS down until the yellow LED is flashing
- Set potentiometer to the minimum value
- Briefly push PSS to the left
- Red LED flashes briefly
- Set potentiometer to the maximum value
- Briefly push PSS to the right
- Red LED flashes briefly
- Briefly press PSS downward
- The yellow LED stops flashing
PSS = Push/slide switch
Press for
1 sec.
Parameterization mode
Exit
parameterization mode
Yellow
LED
flashes
SP1
SP2
Red
LED
flashes
briefly
No flashing
Transmission function
Configuration instructions
SP 1
SP 2
press
rightleft
Press for
1 sec.
Parameterization mode
Yellow
LED
flashes
SP2
SP1
Red
LED
flashes
briefly
SP 1
SP 2
No flashing
Exit
parameterization mode
No flashing
Red
LED
flashes
briefly
Press for
3 sec.
Yellow
LED
flashes
Press for
1 sec.
Press for
1 sec.
Yellow
LED
flashes
Parameterization mode
No flashing
Exit
parameterization mode
Exit parameterization
mode without
saving value.
SP = Switching points
Delete set
switching points
Parameterization mode
SP1
Exit
parameterization mode
Push/Slide Switch Operation: