Data sheet | Item number: 788-346 Relay module; Nominal input voltage: 24 VDC; 2 changeover contacts; Limiting continuous current: 8 A; with manual operation; Red status indicator; Module width: 15 mm www.wago.com/788-346 Item description Note: 06.12.
Data sheet | Item number: 788-346 www.wago.com/788-346 Note: Reinforced insulation between coil and contacts A separator plate (e.g., 209-191) must be used for voltages greater than 250 V between adjacent relay modules and for compliance with the reinforced insulation requirements. To protect the relay coils and contacts, inductive loads must be dampened with an effective protection circuit.
Data sheet | Item number: 788-346 www.wago.com/788-346 Dielectric strength, control/load circuit (AC, 1 min) 5 kVrms Dielectric strength, control/load circuit (AC, 1 min) 5 kVrms Dielectric strength open contact (AC, 1 min) 1 kVrms Dielectric strength open contact (AC, 1 min) 1 kVrms Dielectric strength, load/load circuit (AC, 1 min) 2.5 kVrms Dielectric strength, load/load circuit (AC, 1 min) 2.
Data sheet | Item number: 788-346 www.wago.com/788-346 Commercial data Country of origin DE GTIN 4050821226864 Customs Tariff No. 85364900990 Product Group 6 (Interface Electronics) Approvals / Certificates UL-Approvals Logo Approval Certificate name UL UL International Netherlands B.V. (ORDINARY LOCATIONS) E175199 Sec.6 Compatible products General accessories Item no.: 209-145 Group marker carrier www.wago.com/209-145 Item no.: 209-184 Protection cover www.wago.com/209-184 Item no.
Data sheet | Item number: 788-346 www.wago.com/788-346 Item no.: 2009-115/000-017 WMB-Inline; for smartPRINTER; on reel; stretchable 5 - 5.2 mm; plain; snap-on type www.wago.com/2009-115 /000-017 Item no.: 2009-115/000-023 WMB-Inline; for smartPRINTER; on reel; stretchable 5 - 5.2 mm; plain; snap-on type www.wago.com/2009-115 /000-023 Item no.: 209-128 Adaptor www.wago.com/209-128 Item no.: 209-183 Marker card www.wago.com/209-183 Item no.: 210-110 Fiber-tip pen www.wago.com/210-110 Item no.
Data sheet | Item number: 788-346 www.wago.com/788-346 Item no.: 793-502/000-005 WMB marking card; as card; MARKED; 1 ... 10 (10x); not stretchable; Horizontal marking; snap-on type www.wago.com/793-502 /000-005 Item no.: 793-502/000-006 WMB marking card; as card; MARKED; 1 ... 10 (10x); not stretchable; Horizontal marking; snap-on type www.wago.com/793-502 /000-006 Item no.: 793-502/000-007 WMB marking card; as card; MARKED; 1 ... 10 (10x); not stretchable; Horizontal marking; snap-on type www.wago.
Data sheet | Item number: 788-346 www.wago.com/788-346 Item no.: 793-503/000-024 www.wago.com/793-503 WMB marking card; as card; MARKED; 11 ... 20 (10x); not stretchable; Horizontal marking; snap-on type /000-024 Item no.: 793-504 www.wago.com/793-504 WMB marking card; as card; MARKED; 21 ... 30 (10x); not stretchable; Horizontal marking; snap-on type Item no.: 793-504/000-002 www.wago.com/793-504 WMB marking card; as card; MARKED; 21 ...
Data sheet | Item number: 788-346 www.wago.com/788-346 WMB marking card; as card; MARKED; 41 ... 50 (10x); not stretchable; Horizontal marking; snap-on type /000-006 Item no.: 793-506/000-012 www.wago.com/793-506 WMB marking card; as card; MARKED; 41 ... 50 (10x); not stretchable; Horizontal marking; snap-on type /000-012 Item no.: 793-506/000-017 www.wago.com/793-506 WMB marking card; as card; MARKED; 41 ... 50 (10x); not stretchable; Horizontal marking; snap-on type /000-017 Item no.
Data sheet | Item number: 788-346 www.wago.com/788-346 Item no.: 793-566/000-005 WMB marking card; as card; MARKED; 1 ... 50 (2x); not stretchable; Horizontal marking; snap-on type www.wago.com/793-566 /000-005 Item no.: 793-566/000-006 WMB marking card; as card; MARKED; 1 ... 50 (2x); not stretchable; Horizontal marking; snap-on type www.wago.com/793-566 /000-006 Item no.: 793-566/000-007 WMB marking card; as card; MARKED; 1 ... 50 (2x); not stretchable; Horizontal marking; snap-on type www.wago.
Data sheet | Item number: 788-346 www.wago.com/788-346 Ferrule; Sleeve for 1 mm² / AWG 18; insulated; electro-tin plated; electrolytic copper; gastight crimped; www.wago.com/216-243 acc. to DIN 46228, Part 4/09.90 Item no.: 216-244 Ferrule; Sleeve for 1.5 mm² / AWG 16; insulated; electro-tin plated; electrolytic copper; gastight crimped; acc. to DIN 46228, Part 4/09.90 www.wago.com/216-244 Item no.: 216-542 Twin ferrule; Sleeve for 2 x 1 mm² / AWG 2 x 18; red, insulated; 12 mm long www.wago.
