Technical data
Table Of Contents
- 1 Important Notes
- 2 I/O Modules
- 3 Use in Hazardous Environments
- 3.1 Marking Configuration Examples
- 3.2 Installation Regulations
- 3.2.1 Special Conditions for Safe Operation of the ATEX and IEC Ex (acc. DEMKO 08 ATEX 142851X and IECEx PTB 07.0064)
- 3.2.2 Special conditions for safe use (ATEX Certificate TÜV 07 ATEX 554086 X)
- 3.2.3 Special conditions for safe use (IEC-Ex Certificate TUN 09.0001 X)
- 3.2.4 Special conditions for safe use (ATEX Certificate DEKRA 11ATEX0203 X)
- 3.2.5 ANSI/ISA 12.12.01
20 • Use in Hazardous Environments
WAGO-I/O-SYSTEM 750
I/O Modules
3 Use in Hazardous Environments
The WAGO-I/O-SYSTEM 750 (electrical equipment) is designed for use in Zone 2
hazardous areas.
The following sections include both the general identification of components
(devices) and the installation regulations to be observed. The individual subsections
of the "Installation Regulations" section must be taken into account if the I/O module
has the required approval or is subject to the range of application of the ATEX
directive.