Datasheet

750-623
1
333
1.8
Supply Module 24 V DC / 5 V - 15 V
Delivered without miniature WSB markers
24V 0V
+
+
— —
13
14
C
D
B
A
750-623
Data contacts
Input
24 V
0 V
Output
5,8,10,12,15 V
Status
Output voltage
Input voltage
Power jumper contacts
Output
0 V
0 V24 V
5,8,10,12,15 V
0 V
The I/O module generates 5V, 8V, 10V, 12V and 15V DC output voltages from
the 24VDC input voltage.
The output voltage is selected by a DIP switch located on the side of the module.
The output voltage can be tapped at the CAGE CLAMP
®
connections.
The adjoining modules are also supplied with this voltage level via the power
jumper contacts.
Status LEDs indicate the module’s operating state.
The input voltage and the output voltage are not electrically isolated.
Description
Item No.
Pack.
Unit
Supply Module DC 24V / 5-15V 750-623 1
Accessories
Item No.
Pack.
Unit
Miniature WSB Quick marking system
plain 248-501 5
with marking see pages 352 ... 353
Approvals
Also see "Approvals Overview" in Section 1
Conformity marking 1
Shipbuilding GL
r UL 508
Technical Data
Power supply 24 V DC (-15 % ... +20 %)
Output voltage 5 V, 8 V, 10 V, 12 V, 15 V DC
Output current 0.5 A (1 A at 5 V)
Wire connection CAGE CLAMP
®
Cross sections 0.08 mm² ... 2.5 mm² / AWG 28 ... 14
Stripped lengths 8 ... 9 mm / 0.33 in
Width 12 mm
Weight 37.016 g
EMC: 1 - immunity to interference acc. to EN 61000-6-2 (2005)
EMC: 1 - emission of interference acc. to EN 61000-6-3 (2007)
WAGO Kontakttechnik GmbH & Co. KG
Subject to design changes 18.05.2012
Postfach 2880 - D-32385 Minden
Hansastr. 27 - D-32423 Minden
Phone: [phone] E-Mail: [e-mail]
Fax: [phone] www.wago.com