Datasheet

750-610, 750-611
1
332
Supply Module 24 V DC / 230 V AC
with fuse carrier / diagnostics
Delivered without miniature WSB markers
Data contacts
Supply via
power jumper contacts
24 V
0 V
Status
voltage supply
Power jumper contacts
Error
fuse
blown
+ +
— —
13
14
B
A
750-610
T 6,3 A
250 V
0 V
Status
24 V
230 V
1)
24 V
230 V
1)
1)
only for 750-611
0 V
Error
&
750-610
1
2
3
4
5
6
The supply module provides the I/O modules with the corresponding supply
potential.
The maximum current at the supply module is 6.3A. When configuring the
system, it must be ensured that this total current is not exceeded. Should higher
currents be necessary, intermediate supply modules must be added in the
assembly.
This module is fuse-protected (5 x 20mm). The fuse can be changed quickly,
with ease, from the retractable fuse carrier.
A blown fuse and the status of the supply voltage are indicated via LEDs.
The I/O module sends information about the status of the supply module to the
fieldbus coupler through two input bits. One bit is for the status of the fuse.
The other bit is for the status of the supply voltage.
Description
Item No.
Pack.
Unit
24V DC Power Supply/Fuse/Diagn. 750-610 10
1)
230V AC Power Supply/Fuse/Diagn. 750-611 1
1)
Also available individually
Accessories
Item No.
Pack.
Unit
Miniature WSB Quick marking system
plain 248-501 5
with marking see pages 352 ... 353
Approvals
Also see "Approvals Overview" in Section 1
Conformity marking 1
Shipbuilding ABS, BV, DNV, GL, KR, LR, NKK, PRS, RINA
r UL 508
r ANSI/ISA 12.12.01 Class I, Div. 2, Grp. ABCD, T4
4 EN 60079-0, -15
EN 61241-0, -1
I M2 / II 3 GD Ex nA IIC T4
Technical Data
Voltage via power jumper contacts (max.) 24 V DC (750-610)
230 V AC (750-611)
Current via power jumper contacts (max.) 6.3 A DC
Current consumption (internal) 5 mA
Supply voltage detection level on > 15 V DC (750-610)
> 164 V AC (750-611)
Supply voltage detection level off < 5 V DC (750-610)
< 40 V AC (750-611)
Fuse 5 x 20; T 6.3 A (Fuse not included. Use UL
recognized fuses only!)
Internal bit width 2 bits
Wire connection CAGE CLAMP
®
Cross sections 0.08 mm² ... 2.5 mm² / AWG 28 ... 14
Stripped lengths 8 ... 9 mm / 0.33 in
Width 12 mm
Weight 51.5 g
EMC: 1 - immunity to interference acc. to EN 61000-6-2 (2005)
EMC: 1 - emission of interference acc. to EN 61000-6-4 (2007)
EMC: marine applications
- immunity to interference acc. to Germanischer Lloyd (2003)
EMC: marine applications
- emission of interference acc. to Germanischer Lloyd (2003)
WAGO Kontakttechnik GmbH & Co. KG
Subject to design changes 18.05.2012
Postfach 2880 - D-32385 Minden
Hansastr. 27 - D-32423 Minden
Phone: [phone] E-Mail: [e-mail]
Fax: [phone] www.wago.com